LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.

Stay cool as a cucumber this summer without running your electric bill sky high and your finances into the ground. Summer is such a fun time of year that we all look forward to those hot days spent at the beach enjoying the warm ocean breeze. Sometimes, the heat is just too much. We all need a break. We don’t want to be warm all the time, especially when we want to relax or sleep. It is natural to turn the AC down a bit so you can cool down after a long day in the sun. unfortunately, every degree you lower the thermostat is more money you are going to be spending. An electrician in Santa Monica wants you to stay cool and comfortable, without breaking the bank. The team at The Electric Connection has been helping customers like you for years and is here to help.

There are some things you can do this summer to help stay cool without taxing the AC. Your Santa Monica electrician says these are tried and true methods.

Stay cool this summer without having to pinch too many pennies. Give The Electric Connection a call today to schedule your ceiling fan installation.

Whether you have a spacious and expansive wraparound porch or a cozy stoop to welcome you inside, the front porch is the perfect place to establish a mood that flows throughout the home. Today I’ve rounded up a unique collection of front porch decorating ideas that celebrate the beauty of Spring with bright colors and endless charm.

Springtime is all about freshness and a world ablaze with color. This bright DIY welcome mat filters out both the dirt and the troubles of your day.

I’m a big fan of coming up with Etsy.)

Unique ways to display a bounty of your Spring flowers abound in these fresh front porch planter ideas that are anything but predictable.

via submersible LED tape lights to your water feature.

As you welcome your friends and family into your home this year, there are many ways to welcome Spring too. Small touches and pops of color are simple ways to turn your front porch into a bright and cheerful space to invite guests into the home.