You have probably heard about electrical safety since the time you can remember. However, because we are so used to using electricity and having it around us all the time, we rarely stop to really think about it. Complacency can be dangerous. It is important to take a step back and really look at your home and surroundings. Are there any electrical hazards looming? Are you practicing safe electrical habits? An electrician in Burbank has some quick tips for you to practice. You can always call The Electric Connection to learn more and ask more in depth questions about electrical safety.

1-Only have electrical work in your home completed by a qualified Burbank electrician.

2-Plug large appliances like refrigerator, oven and microwave directly into an outlet.

3-Use GFCI outlets in the kitchen and bathroom area. These should be installed by an electrician. Burbank residents can protect themselves from electric shock in areas where water is present with this type of outlet.

4-Don’t make extension cords a permanent solution. If you need more outlets, have some installed by an electrician.

5-Don’t plug more than one heat producing appliance i.e. toaster, space heater, coffee maker, into an outlet at the same time.

6-Have all remodel work completed by an electrician.

7-If you are buying a new home, have it inspected by an electrician first.

8-Only use lightbulbs that are appropriate for a light fixture.

9-Ensure electrical cords are not damaged or at risk of being damaged from being run across walkways or smashed in doors.

10-If you experience a tingling feeling or small jolt when plugging in an appliance, stop! Don’t use the appliance until you can have the outlet inspected.

These are quick, basic tips that can actually prevent serious injury. If you have any questions or need an electrician to complete some work or an electrical inspection, give The Electric Connection a call today.

Maybe it was the attire that tipped you off, or the unmarked van. Whatever it was, the truth remains: there are plenty of home service scammers, and false electricians aren’t an exception.

On the Kolb Electric blog, we’ve spent a lot of time talking about how to tell if various electrical appliances and processes in your home are bad or faulty. We’ve discussed outdoor lighting, breakers, outlets; we even did a bit on hot tubs! But what do you do if your electrician in Gaithersburg is bad? How can you even tell; and what separates the slouches from the professionals?

Looking for reliable electrical services from a certified electrician in Gaithersburg? Contact Kolb today!

Getting electrical work done in your Maryland home is already pretty stressful. So the very last thing you want is to call in an “expert” only to get bad work, poor results, and services that could barely even be called service. To make sure you get the good stuff when you’re looking for dependable electrical services, keep an eye out for these warning signs!

Ready to get the service and quality you deserve? Contact Kolb Electric today! When you work with our team, meeting your needs and bringing you the best in reliable quality is our primary goal, and we’ll never leave you confused, angry, or unhappy!

constant-current LED driver or constant-current driver is used to regulate the amount of current that is supplied to an LED or LED array to maximize LED lifetime. If current is not regulated, LED brightness can fluctuate and life span can be shortened. The constant-current driver is used for LEDs or light fixtures that require a stable output current and operate within a range of voltages. Most finished LED products already have a constant-current driver or resistors to regulate current. If you’re building an LED fixture or replacing a constant-current driver, it’s important to verify that the output current and voltage of the driver is compatible with the LEDs’ current and voltage. If your LED product already has a constant-current driver or uses resistors in the LED array, you might need a constant-voltage power supply.

If your LEDs are dimmable and you want to change their brightness, choose a Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton.

Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10-volt signal level with a frequency between 100Hz-3KHz. The MLD-5A are compatible for this application.

Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as 12-Volt Mean Well HLG-40-240 Series or 12-Volt Mean Well HLG-600 Series or here.

The efficiency of a power supply or driver indicates the percentage of power that goes toward making your LED product function. An efficiency of 80 percent or higher is recommended for operating LEDs. 

When choosing a driver or power supply, the size of an LED product’s housing or area of installation is important. If you wish to put a constant-current LED driver inside of a product, the driver must be small enough to fit in the product’s housing. Similarly, if the driver or power supply is used outside of the product’s housing, it should fit the area of installation. Drivers and power supplies are available in a variety of sizes to suit your needs.

A Class 2 driver or power supply is in accordance with limited power levels defined by the National Electric Code (NEC) and fulfills the requirements of Standard UL 1310. Output is limited to 60 volts DC and 100 watts. Because power sources with this rating have limited output, it might not be possible to power as many LEDs or lights as those that don’t have a Class 2 rating. However, these power supplies and drivers provide protection from fire and electric shock.

A Class II rating refers to a double insulation layer between AC input and DC output wires. These drivers and power supplies do not require a ground connection.

When the detector senses an object across its field of view move, it triggers the lights to turn on. The lights would stay on from 1 to 20 minutes, depending on how you preset the timer. After the preset time, the detector automatically shuts the lights off unless there are further movements within its range.