I’ve been an electrician in the Los Angeles area since 1979. In that time, I’ve worked on many older homes in Pasadena CA with wiring systems that were insulated with cloth that’s been varnished. Surprisingly, prior to 1950, many electrical systems relied on cloth insulation. Who would think to put flimsy cloth around a live electrical wire?! However, cloth doesn’t conduct electricity well, so it’s a good insulator. Before the age of plastics, cloth was the insulator of choice for electrical wiring.

Unfortunately, cloth insulation has a liability. As it ages, the cloth can disintegrate and expose bare wires. Cloth insulation can pose shock and fire hazards that modern insulation isn’t subject to.

Does Your House Have Cloth Wiring?

Some cloth-insulated wiring systems can look like modern wiring. Was your house built prior to 1950? If so, it may well have cloth-insulated wiring. A qualified electrician in Pasadena CA can tell you with certainty.

Cloth Insulation Falls Off Wires

Cloth insulation can become brittle over time and fall off the wires, sometimes in chunks. Bare wires pose the danger of shocking anyone who accidentally touches them or of causing fires if two bare wires touch or come too close.

Cloth-Insulated Electrical Systems May Be Ungrounded

Cloth-insulated wiring systems may not have been grounded. Grounding provides additional assurance that excess electrical charges will be routed out of your house and into the ground.

One benefit of grounding that many people are unaware of is that without grounding, low-level electrical charges can build up in your wires and can shorten the lives of computers, entertainment systems, refrigerators, microwaves — any device which includes electronic components like sensors and timers.

Even more importantly, grounding protects people and animals from shocks should an appliance or an electrical system malfunction.

Upgrade for Safety

Upgrading cloth-insulated wiring systems is recommended for fire safety, protection of modern electronics, and for the safety of your family against electrical shocks. If your electrical wiring was installed prior to 1950 and you think that it might have cloth insulation, call The Electric Connection, a licensed Pasadena electrician, to take a look. Many electricians will do an inspection for free and give you a free estimate for any upgrading that might be needed.

Click here to read more.

We all need a little inspiration to reveal our true creativity. If you’ve tired of your boring bedroom’s look, here are five on-trend ideas on how to illuminate your dream bedroom getaway brilliantly.

1. Unexpected objects in the same color family. At first thought, using lamps that are large enough to be placed as floor lamps may seem like it would be cumbersome. But when sleek, unobtrusive and blending in with the surrounding scheme, this can be a fun surprise that draws the eye to details you wish to highlight, such as interesting wallpaper or art.

It is important you not only feel safe in your home, but are actually relatively safe from most things. We know there are always hidden dangers around us. We can be ready to deal with these things and there are a few little things we can do around the house to help alert us to those safety issues. An electrician in Glendale has some safety tips that will make your home safer and make you feel a little more comfortable and safe when you and your family are home or away. The team at The Electric Connection can help you get these safety measures taken care of.

GFCI Outlets

These outlets can prevent electric shock. They are designed to shut off the instant the circuit is interrupted. These outlets are generally placed in bathrooms and kitchen areas. If an appliance comes into contact with water while plugged in, the outlet trips, cutting the current and preventing shock.

Electric Panel Inspection

It doesn’t hurt to have a Glendale electrician take a look at your electric panel. It may not look like much to you, but to the trained eye of an electrician, it can say a lot. You will learn about the condition of your breakers, the panel itself and the wiring that powers your home. If you have been having trouble with tripping breakers, this inspection will help you learn why.

Carbon Monoxide Detectors

All homes should have at least one carbon monoxide detector installed explains an electrician. Glendale homeowners can install the detectors themselves. They are usually battery-powered and can be placed in the home to alert you to carbon monoxide levels that are too high.

Smoke Detectors

You probably already have a couple of these in your home, but it doesn’t hurt to have a couple hard-wired smoke detectors installed as well. You can never be too safe.

Give The Electric connection a call today and schedule your safety upgrades.

Are you looking for energy saving tips to help your business reduce annual energy costs? Businesses consume far more lighting energy than homes, so if you’re looking for a simple and cost-effective place to start, addressing your business’s lighting solutions offers ample opportunity.

“Out with the old” should be your mantra here. Incandescent light bulbs are far from efficient, emitting 90 percent of energy as heat – not light.

The curly cousin of long-tube fluorescents, CFLs can be used in place of incandescents in standard light sockets. They contain mercury and should be handled with care; however, they use 75 percent less energy and last 10 times longer than incandescents.

Lasting 25 times longer than incandescents and using 75-80 percent less energy, LED lighting options have recently come down significantly in price. To get the most bang for your energy buck, LEDs are a top choice.

High intensity discharge lights are extremely efficient at producing large quantities of very bright light and are an excellent choice for warehouse and commercial settings. Be sure to talk to an electrician to get the best color spectrum to suit your needs.

Using 1/5 to 1/3 the energy as incandescents and lasting 10 times longer, these fluorescents offer flexibility in various commercial settings.

Twice as efficient as incandescents, halogens produce a very bright white light that is well-suited for outdoor applications such as security and stadium lighting.

Light dimmers and timers deliver just the right amount of light just when you need it, reducing energy use and costs. They also improve security while you are away and can enhance the functionality and ambiance of your business.

The future of lighting, we’re not talking battery-operated, but fully automated lighting powered by remote control and smart device applications. The technology of this solution offers you the capability to monitor usage and costs, with the added convenience of on-site and remote functionality.

Mr. Electric® will perform a complimentary evaluation of your current setup, analyzing for efficiency and function and offering lighting options that can lower your operating costs significantly.

Designed to your specifications, our experts can design custom lighting solutions that perform well and look great – all while keeping energy costs under control.

Security, landscaping, parking, retail – you name it! Whatever your lighting needs, Mr. Electric will spotlight your perfect solution.

Schedule a commercial electric energy audit today. A commercial energy audit can offer even more energy savings tips for the benefit of your bottom line. Mr. Electric can:

Don’t let excess energy costs drag your business down, get the energy saving tips you need with the help of Mr. Electric today!

Spring is one of the best times to spruce up your home and do a little remodeling. If you are like most homeowners, then you have allowed your to-do list to grow over the winter, and spring is your first opportunity to add your new room or expand your garage. To maximize your remodeling efforts, we recommend that your upgrade your electrical system in the process