Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Now, why is the blue LED so important? Quite simply because there are no white LEDs. The white light that our eyes detect is created by using a blue LED and some yellow phosphor. The yellow phosphor coating may be placed directly on the blue LED or on the glass envelope that houses the blue LED. Either way when the blue light from the blue LED passes through the yellow phosphor the resulting light appears to be white.

In late 2014 at the Nobel Prize Award Ceremony in Stockholm, Sweden, the three Japanese scientists who developed the blue LED while working at Nichia Chemicals will share the Nobel Prize in Physics for their work on the blue LED. In official terms the Nobel Committee awarded this year’s physics prize to Isamu Akasaki, Hiroshi Amano, and Shuji Nakamura “for the invention of efficient blue light-emitting diodes which has enabled bright and energy-saving white light sources.”

Furthermore, the Nobel Committee pointed out in its announcement that the results of all the scientists’ hard work will be on display everywhere as the three recipients make their way through Stockholm: “the light from their invention will be glowing in virtually all the windows of the city.” And they can be assured that, as this century progresses, the ascendancy of the LED will only become more dramatic.

Saving energy is a laudable goal. By using less electricity and other energy around your home, you reduce your contribution to environmental degradation and climate change. On the other hand, easy and reliable access to electricity is in large part responsible for the high standard of living that most Americans enjoy. Read on to learn more about the intersection between comfort and energy consumption, and how you can cut back while still participating in modern 21st century life.

Energy Consumption and GDP Go Hand-in-Hand

When it comes to residential households, cheap power allows us to run the electrical work that lends so much convenience and comfort to our day-to-day lives – refrigerators, air conditioners, lights, computers, televisions and much more. On a societal scale, access to fossil fuels and the energy potential stored within is what has made possible so many technological and logistical advances in the first place. However, as the years advance, the science is becoming ever more clear – excessive carbon emissions are causing the planet's climate to change, often in destructive and unpredictable ways.

Of course, no one wants to go back to the days of pushing a plow behind a donkey and churning butter by hand, either. The big question, and one that may become existential, is whether we can decouple our energy consumption from our standard of living. Historically, consumption and GDP have risen together in lock-step. Can the United States and other developed countries figure out how to break the chain?

Decouple Lifestyle from Consumption

A recent report by the Energy Collective tells us that “reductions in energy intensity is arguably our most important tool to achieve a sustainable energy future.” What does it mean? That we can get the same or more production out of less energy usage. In some ways, we've already made progress – between 2007 and 2013, energy consumption dropped 4.5 percent in the United States, while the Net Domestic Product continued to rise.

That's all well and good for the country, but what about your household? The same principles apply – for a more sustainable future, look for ways to get the same results with less energy use. That means switching to efficient appliances, like Energy Star certified equipment. It means replacing old incandescent light bulbs with modern LED models. And look for little changes that can make a big difference, like adjusting your thermostat a few notches up or down to reduce the load on your HVAC equipment.

Make a Difference in Your House

You can do your part to cut down on your energy use while still enjoying the amenities of modern life by making targeted efficiency investments and simple behavioral changes. If you need tips on how to reduce your energy bills without reverting to stone age-style living, or need any other electrical work, contact a reputable electrician today.