Nineteen flash patterns greatly increase visibility. Patterns can be synchronized between light heads and easily controlled with one of Super Bright LEDs’

A weatherproof housing and sealed polycarbonate lens are built to withstand impact with road debris and exposure to wet conditions. Installation hardware is included along with foam anti-scratch pads for vehicle surface mounting. The durable LED lights operate within a wide 12-24V DC range for compatibility with any vehicle.

Protecting your homes electronics with whole house surge protection is dramatically more important today then just ten years ago.  Your home becomes more and more filled with electronics and appliances that need protection from power surges.  A lighting storm can wreak havoc on the utility grid and your homes electronics.  A good lighting storm will generate 12-18 calls in one day just for our local business Custom Electrical Services.  Sometimes it even seems you can almost track the storms path as it moves across the Des Moines Metro based on the incoming calls.  Customers who experienced power surges have received thousands of dollars and in some cases tens of thousands of dollars worth of damage from one major power surge.  A surge is most commonly known for taking out electronics such as computers, TV’s and stereo equipment.  But did you know many of your homes appliances now have sophisticated electronics built into them?  We see garage door openers, refrigerators, dishwashers, and even the homes hot water heater, air conditioner and furnace all taken out by power surges.

You should know that nothing will fully protect your home from a direct lighting strike.  However in most cases the damage is caused by the power surge rather than a direct lighting strike.  We are all familiar with the power strips that offer surge protection you can purchase from the big box stores.  Even if you have a whole house surge protection system we still recommend point of use surge protection.  When purchasing surge protection you want to look at the joule rating.  The joule rating is the amount of energy absorption / dissipation a surge protector can handle before the surge protector fails.  The higher the number the better the surge protection device is at protecting the electronics plugged into it.  But what about the items not plugged into the power surge strip?  Well unfortunately anything not plugged into the power surge strip is not getting any protection.  So that $1200 dishwasher, $600 garage door opener, or $4,000 air conditioner is not getting any protection from your point of use power strip.  But don’t worry you now have options.

We have installed hundreds of whole house power protection devices in peoples homes across the Des Moines Metro.  One customer in West Des Moines received frequent issues from power surges.  After we installed a SPD (surge protection device) in each of his electrical panels he has not lost any electronics since.  A whole house surge protection device like a power surge strip is only capable of absorbing or dissipating so much power.  This particular customer received a significant power surge which he said would of normally damaged his very expensive home theater equipment and whole house automation system in the past.  A SPD when properly installed in your electrical panel can protect your entire home from power surges.  Not just electronics plugged directly into a surge protector.

There are several types of whole house surge protectors on the market.  Many are good while others are not.  Even the best whole house surge protectors are not as effect if they are not properly installed.  Manufacture specs are specific when it comes to the required installation so the device can properly perform the way it was engineered.  A good quality whole house surge protection device will come with several thousand dollars worth of manufacture insurance covering your homes electronics if the device were to fail when properly installed.

We have a variety of whole house surge protections devices capable of providing safe and reliable protection for your home.  We offer Siemens devices as well as Eaton products we can install in your home or business today.  Stop procrastinating and call us before the next big storm moves across the Des Moines metro.  From Adel to Altoona, from Norwalk to Ankeny and all the surrounding communities we are here and ready to serve your 24/7.

Categories: Uncategorized« Des Moines 24 Hour Electrician  |  Storm Damage Electrical Repair 24 Hour Service »

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.

Over time, things can go wrong with any electrical system. It’s part of the nature of wiring:  wires deteriorate and connections can break down.  But what if the problem that develops is because of something that happened when the electrical system was installed, something you didn’t have any control over?

There’s nothing so treacherous to the safety of your home as faulty wiring. Mistakes in the initial wiring of your home can lead to serious safety hazards and property damage.

So what can you do about faulty wiring?  A licensed Dallas electrician can help you find the problem areas in your wiring and repair them, but we generally don’t get called in until the faulty wiring causes a serious problem.  Nobody really has the time or money to deal with these problems, so it’s better to not have to suffer through them in the first place. The best way to do that is to be aware of the electrical warning signs that your wiring might be faulty.