Then, once you install the fixture, simply run it while you’re taking a bath or shower, and for about 30 minutes afterwards. It may also help to put the fan on a timer switch so you never forget. You should have separate switches for the light and the fan so you can operate them independently.

For The Bright Bathroom

We’ve all been there. A quick midnight trip to the bathroom. You need to be able to see, but it sure would be nice if you didn’t have to jolt yourself awake with every lumen of your bathroom lighting on at full power. You can solve this problem if you nab a lighted bathroom exhaust fan with a night light setting.

2. The Orleans Bathroom Exhaust Fan

4. The Ventura Bathroom Exhaust Fan

A beautiful deck is something that should be enjoyed long after the sun goes down—which is why it’s important to have the right kind of deck lighting! From a purely functional point of view, deck lighting serves three purposes:

But when it comes to the right type of lighting for your home, deck lighting can do so much more! The key is to design a lighting system that performs all three of the above tasks while enhancing the look and feel of your deck. Rather than flooding the deck with simulated sunlight, integrate accent lighting with posts, railings, stair risers, and other elements to create an inviting after-dark atmosphere.

Low-voltage deck lights – the most common types of deck lights, low-voltage lights are a safer alternative to line-voltage, posing almost no risk of electric shock. Electrical connections with low voltage lights are simpler, requiring neither a permit nor a license to install.

Disadvantages of low-voltage deck lights are that they require a transformer, and unless they are divided into more than one run of wiring, they share the same 12V of power—which, if you have a lot of lights, can reduce the brightness.

Line-voltage deck lights – line voltage deck lights are brighter, but their installation is more strictly enforced. All connections must be made in an approved electrical box, and any cables run in the open must be enclosed in a proper conduit. Line-voltage deck lighting must be installed by a licensed electrician.

Solar-powered deck lights – because solar deck lights require no electrical connections, timers, or switches, you won’t need to drill routing holes, run wires, or make connections to install them. What you will need, of course, is steady sunshine—usually six hours per day, according to manufacturers. Sunlight charges the lights’ batteries, which mean they are typically limited to post-cap features, although lanterns, string lights, and recessed solar lights are available.

The solar batteries will need to be replaced every 500 charges or so, but fortunately doing so is fairly easy.

Once you’ve decided which type of deck lighting you want, it’s time to choose how you want that lighting installed. An ideal deck lighting design makes use of all three styles of lights: post-cap, side-mount, and recessed lights.

The largest and most prominent fixtures in the accent deck lighting category, post-cap lights sit at the top of your deck posts, usually at the top and bottom of staircases and at intermediate posts along the perimeter of the deck. Post-cap lights are available in a variety of colors and styles to match your deck, and most manufacturers make dummy post-caps, which are unlit and allow for some space between light sources.

Side-mount deck lights can be installed on the side of posts instead of the top. Side-mount lights can be beneficial if your posts come to eye level when guests are sitting down, as post-cap lights could shine light directly into peoples’ eyes.

Recessed deck lights are the perfect example of how to accent a deck without overlighting it. Recessed deck lights are installed in holes drilled in the stairs or the floor of your deck to provide lighting while being almost perfectly hidden during the day.

Incandescent Deck Lighting – incandescent bulbs are widely available in several different shapes and wattages, and because they are relatively inexpensive, replacement is quick and easy. They cast a softer, warmer glow than LEDs, but consume more energy, making them less efficient and shortening their lives.

LED Deck Lighting – because of the complex housing and circuitry involved, LED lights tend to be more expensive than incandescent lights. They tend to be more than worth the cost however, with vastly improved lifespans (10,000 to 100,000 hours) and high efficiency with almost no heat production. The trade-off is that unless mirrors or reflective surfaces are used, the light output is focused narrowly in only one direction and can be harsh on the eyes in contrast with a dark backyard.

The right type of lighting can make all the difference for your deck. For outdoor lighting installation in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

In our previous blog, we covered some of the benefits your home may enjoy by installing outdoor lighting, such as flood lights or accent lighting; however, running permanent electrical to the corners of your property is more complicated than just draping an extension cord to the desired lighting area. Often, lighting and other external electrical elements require electrical trenching to safely run power lines underground, and the season for safely and easily digging these trenches is quickly drawing to a close.

There’s never a good time to dig up your yard, but fall is far from the worst time. By choosing to install necessary subterranean power lines during the fall, you can enjoy these benefits:

Getting your yard equipped with subterranean wiring is no small feat: It requires careful planning and expert execution. Between local and regional zoning codes, inspection parameters and availability, and overall safety and execution of the work, each electrical trenching is a big job that requires expertise and knowledge. Some of the things our Des Moines electricians offer homeowners looking for electrical trenching include:

Reach out to Electrical Gurus today, before winter sets in and causes delays in your outdoor plans! By getting a jump on the work with our expert electricians, your yard will be ready to go well before summer comes.

Get in touch with our Des Moines electricians today!

The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.

Faulty electrical wiring does not only cause fires but could also result in electrocution if you touch an exposed wire. When unconcealed wires come into contact with combustible materials, they can easily cause fatal fires. You can prevent many deaths caused by faulty electrical wiring by learning some signs of faulty electrical wiring. The main signs include: