Most people have decor and artwork in their homes. While they do know how they want the rest of the lighting in their house to be, they are sometimes at sea as to how they can showcase their art pieces. Most just end up placing picture lights or spot lights above these pieces; however, that doesn’t always flatter the artwork. In fact, sometimes it also takes away from the beauty of it.

Just as you have different type of lighting for different areas in your home, art lighting is a specialised task and needs a certain amount of planning, an eye for detail and creativity. The best way a novice can learn how to get the right kind of lighting for the artwork and decorative pieces in their home is to learn from art galleries.

You must have noticed how impressive the paintings and artwork displayed there look. Light affects different types of artwork in different ways; if you want to bring out its beauty, it’s important that it be lit correctly.

Here are some tips to get you going; you can then mix-and-match and use your own creativity to achieve the look you want in your home:

While these are the basic lighting tips, you would also need to choose the right type of bulbs while planning lighting for artwork in your home:

For more lighting ideas and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

photo courtesy of moviewritemyu.wordpress.com

“The first rooftop celebration atop One Times Square, complete with fireworks display, took place in 1904.*

Don’t let this New Year’s Eve slip away without a proper celebration.  Whether you are quietly reminiscing with a loved one over dinner or out on the town in the midst of noisemakers and confetti–see yourself in the best of light and make 2015 your brightest year yet.  New chandeliers, table lamps and wall lights are a marvel with outstanding and energy-wise light sources and intriguing configurations.

“CHIMERA” WALL SCONCE FROM CORBETT

“URBAN NIGHTS” FROM MAXIM

“RING O” FROM VAN TEAL

“GATHERING” FROM VAN TEAL

“RAVENNA” FOYER PENDANT FROM HINKLEY LIGHTING

See the the latest portable lamps, chandeliers and decorative accessories at 1800lighting.com. Stay tuned for the latest introductions from the Dallas Market January 2015.  Visit a Capitol Lighting showroom or 1800lighting.com for expert advice and a complimentary lighting plan for a new year of inspiring illumination.

*wikipedia.com

During a recent trip down to Washington, DC I stopped by the National Mall to tour the astonishingly energy efficient homes on display as part of the Department of Energy’s Solar Decathalon.  The Solar Decathlon is one of the DOE’s signature programs to promote cutting edge design and green techonology.

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. This article will assume that you have some elemental electrical wiring knowledge or aptitude, and it will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.

It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns.

Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.

The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.

White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.

A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.

Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.

There are four types of 3-phase electrical power:

No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.

Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.

The above information should give you a nice guidepost for doing more research into and getting more practice with either residential wiring or industrial wiring. Again, safety comes first!

Legrand has been operating in the U.S. since 1984 and continues to bring its unique products to the American market. In addition to a luxury look, the brand offers many useful features and benefits to your home. From innovative gesture recognition to cross-compatibility with different bulb types,

Traditional lighting offers few options for adjusting light levels from room to room or regulating how much energy your lights use. Legrand addresses this problem with its innovative designs and technology, providing switches and dimmers with unprecedented options for control. Instead of flipping a switch, you might tap a console, press a rocker or toggle or simply wave your hand in front of a panel to turn lights on and off. Each fixture is designed to be as flush with the wall as possible, creating a clean look in any room.

Legrand dimmers come in six designs, each with its own combination of switch and dimmer controls: