We use electricity everyday of our lives; powering our televisions, lights, and appliances. While these may seem easy enough to turn on with one click of a button, the steps that go into powering these things can be complex. Here is a look at the systems that go into powering your home.

All electricity originates from the electrical utility company, BC Hydro in most cases. The electricity is transferred through power lines or underground lines to your home where it will go through the following series of connections:

Problems can occur at any point in this process. The inner workings of all these systems are complex and dangerous if tampered with. Expert Electric understands all the complexities and inner workings of your home electrical system. We can assist at any point to diagnose and fix any problems you may be experiencing.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

Sometimes replacing a light switch or an outlet can be a quick job done in an afternoon. You may think looking up a ‘how to’ video on YouTube is all you need. But remember, electricity is dangerous and if you are not sure about what you are doing, it is better left to a professional. Here are a few troubleshooting tips to review before calling a professional electrician.

A common problem that can occur is circuit breaker tripping. If you find that power to certain parts of your home is constantly being shut off and requires you to use the circuit breaker to turn it back on, the line could be overloaded. Having to many appliances or electrical devices on one circuit can be too much for the line to handle and will cause the breaker to trip. To avoid this, try placing devices on a different circuit or unplugging appliances before you begin using another. If you continue to have problems you may have an issue with the circuit or one of your electrical devices. It may be best to call an electrician to diagnose the problem further.

Light bulbs must be replaced from time to time; it’s unavoidable. A common problem you could experience is dim or flickering bulbs. Turn off the power to the bulb and replace it with one you know is working properly. If the problem persists, there may be an issue with the socket or the wiring and it is best that an electrician takes a look at the problem.

While there are countless problems you can experience in your home, a good rule of thumb is to stay within your comfort zone. Everyone has a different level of knowledge about electrical systems but if a problem exceeds your understanding, it is best left to a professional. If you are unfamiliar with rewiring new sockets and switches, leave them alone and call an electrician. Tampering and altering wire connections can result in serious injury if not done properly. Be very cautious if you come across an exposed wire or are constantly being shocked, you could have a major safety issue on your hands. Make sure you shut off all power to the area or appliance you are unsure about and contact a professional.

In light of recent tragic events in our community, Custom Electrical Services will be handing out Blue Lives matter bracelets to all our service customers for the entire month of November starting next week.  Our service technicians will also be wearing the Blue Lives matter bracelets.  Our hearts go out to the families of Urbandale Police Officer Justin Martin and Des Moines Sgt. Tony Beminio as well as all affected by these senseless and cowardly murders.  If you would like to make a donation to the families of either Officer Martin or Sgt. Beminio you can do so with through the  Des Moines Police Officers Credit Union.

Categories: community« Attention Homeowners: Do you know…  |  Shining Light On The People Who Brighten Your Homes Everyday! »