The storage of renewable energy for business and homes, and it’s applicability as a renewable energy solution is often seen as a daunting prospect, but solutions are now available that truly bring this “next generation” technology to a level that can be easily implemented and understood.

Renewable power needs to be broken down into individual applications and needs. Not everyone cares about promoting technology and advancements, but by taking steps one at a time, we accomplish two things. One is education on possibilities, and two is further development on technology. Here is my idea on awakening society at a level most people can comprehend until other options become refined and perfected.

Storage of renewable energy with Wind and Solar for daily use:

Photovoltaic and Wind technology together make this really cool. When you add power storage with renewable energies, these automatic transferred units can be programmed to “sell back” electricity when electrical demand and storage capacities are satisfied. All of this is programmable in any order/sequence desired. By putting the units side by side, these systems can produce 240 volt single phase or three phase power with a pure sign wave.

Here is a great example of a real world solution that we call the Power Cart. This example utilizes solar panels, yet wind power could be added to the system very easily. This Power Cart system provides 20,000 watts of usable power, rechargeable through 4 solar panels, offering any home or business the ability to create, store, and use their own renewable electricity on a daily basis, and maintain power in the event of an outage.

Power Cart

Power Cart will have a Continuous Output of 3.6KW with a 9KW Surge start. This 48 volt grid interactive Outback power plant has 60 amp input/ output, and a UPS 60 amp transfer switch. It works from batteries, generator, or grid and can be charged by sun, wind or any type of generator or from the utility grid. Recharge can be programmed to take advantage of these in any order or percentage you desire. It is internet programmable and monitorable taking over 400 screens in excess of 10,000 commands – including the most important one ‘Let me work on automatic and don’t bother me.’ Also included is complete DC protection from the array to the charger, and from the batteries to power plant& AC protection via 60 amp breaker outlets (wired per country – as per order) also available in any output voltage ex. 100-150 volt, in 50 or 60 cycle.

Power Cart is a 4 wheel trailer – Ready to Work. No assembly required

These can be daisy chained for more production, more voltage, more storage.

Wi-Fi capable.

You work hard to keep a roof or your family’s head and you want to protect them while they are at home. You probably lock your doors and windows at night and leave a light so nobody trips when making one of those late night bathroom runs. Is there more you could do?

Carbon Monoxide and Smoke Detectors

You can add an extra layer of protection to your home for your family by having smoke and carbon monoxide detectors in the home. An electrician in Beverly Hills can hard wire a smoke detector into each room of the home. This is an ideal option, because you do not have to worry about batteries going dead or being “borrowed” for some toy or remote. The detectors rely on your home’s electricity. Of course, you will still need to have a battery powered detector in the home. In most models, the electric powered detectors also have a battery backup option.

Hard wired smoke detectors should be placed in every room somebody sleeps in as well as the basement if you have one. The detectors can be interconnected, so if one goes off, they all go off, alerting occupants to a fire. This is an ideal option for those who like to sleep with their bedroom doors closed.

Carbon monoxide detectors should also be installed by an electrician. Beverly Hills homeowners should absolutely have one of these detectors in their home to protect themselves against the odorless gas, carbon monoxide. As with the smoke detectors, an electrician will hard wire a carbon monoxide detector on each level of your home. These can be interconnected as well.

If you use a gas stove or have a garage connected to your home, you will definitely need to consider having a carbon monoxide detector. You can rely on The Electric Connection to get this extremely important job done for your family.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs: