Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

Lighting fixtures can be a great addition to your household especially if you’re looking to improve your home’s appeal. Dim or flickering lights can be frustrating to deal with and can cause a real headache. Turning the lights on to only find yourself surprised with weak light bulbs can be inconvenient. And when it comes to your kitchen and bathroom, lighting fixtures are so beneficial since they see the most usage in your home. With poor lighting efficiency, you will see a decline in functionality for either room. Lighting is always going to be a key component for your home and that is why it is important to take care of lighting issues. When you’re looking make upgrades for your home, lighting fixtures should be at the top of the list.

Track lighting is a great option for homeowners who are looking to increase both the appeal and visibility of their bathroom or kitchen. Since track lighting is fairly easy to install, it can become an immediate update to increase the degree of illumination for your home. Track lighting will also allow you to point lamps in any direction, increasing the level of customization of lighting fixtures that you can take advantage of.

One of the lesser lit areas of your bathroom or kitchen is probably around your cabinets. It can be frustrating trying to find spices or even towels without enough lighting surrounding it. A helpful lighting installation is adding one under the cabinets. This is the best solution to this problem and in the meantime, adds an ambiance to the kitchen and bathroom areas of your home.

Feeling classy? Finding unrivaled lighting fixture.

Each process of construction is directly or indirectly related to the other, so having a bit of knowledge about each one of these is imperative even if you specialize in only one.

From a contractor’s perspective, the construction of a house can be divided into two main phases: wet and dry. The wet phase refers to the initial phase when the house is unprotected from moisture caused by external forces such as rain, while the dry phase is the phase when most electrical work is carried out as the interior is safe from rain and snow.

On the other hand, from an electrician’s perspective, the two main phases of construction include phase one – the rough in, and phase two – the finish. This division is based on the stage of finishing that the walls are at. Here is a step-by-step guide into how the electrical work is carried out during the construction of a house:

Since there is a lot of machinery that operates on electricity and there is no electricity connection at the construction site, a temporary electric pole is installed during this stage.

Whether you have a scheduled lighting project or an emergency on your hands, there are plenty of situations when it’s appropriate to call in a local electrician. For your safety and sanity use a certified electrician that can provide quality work and can be counted on for years to come.

Repairing a Wire Damaged from Drilling a Hole in the WallWhether you’re hanging pictures, shelves or a TV mounting bracket—or any other reason you might be drilling into a wall—there’s always the possibility that you’ll hit and damage a wire. This is definitely a fix you want to leave in the capable hands of a certified electrician.

To prevent the problem from happening again, use a stud finder and aim for the center of the stud. Before drilling, use a small tipped screw driver to verify you are hitting the stud and not the side. Once you have verified, feel free to drill away.

To work with a licensed qualified professional for your next electrical project, please contact a certified electrician at ElectricMan today. ElectricMan is a trusted, local electrician with 27 years of experience. For more information visit the ElectricMan website, and don’t forget to also ‘like’ us on Facebook and follow us on Twitter, YouTube and Pinterest.