Just like every other industry, the electrical industry is constantly changing and improving. Sticking with out-dated practices will leave electrical contracting companies behind their competitors. A high quality, leading electrical management team stays ahead of the industry and keeps their services up-to-date and revolutionized.

As stated above, the electrical industry is changing rapidly. Just a few years ago building owners were changing their lighting from “old technology” T12 fluorescent lamps and magnetic ballasts to T8 lamps with electronic ballasts. This resulted in more uniform lighting that was less expensive to operate. Then came the T5 lamps and now …. LED lamps and fixtures. The new LED fixtures and lamps can result in an enormous energy savings, but buyer beware. Many manufacturers and contractors have sprung up to chase the new LED lighting market. Some of them are reputable and deliver a good product, but some of them are fledging and can leave a client “in-the-dark.” Thus, if you are in the market for energy savings through lighting make sure you deal with an experienced electrical manufacture and contractor.

Throughout the modern age, we have become desensitized to the radical displacement of major products, categories, and even whole industries. It’s amazing how one simple technological innovation can change the way we use a major product or service in our lives; one of today’s largest examples of this is how LED bulbs are rapidly displacing the standard incandescent or CFL bulb.

VCRs, cassette tapes, home phones, movie stores, steam engines, and more have been added to the list of technologies that were once considered revolutionary, but are now just a novelty. The same will soon be said for CFL and, especially, incandescent light bulbs, as LED bulbs seem to outperform their predecessors in nearly every way.

There are really only two ways to point to an LED bulb and find that it has any flaws when compared to a standard light bulb: They don’t last (quite) as long when kept in a closely confined container that is left on for extended periods and they cost more to purchase. The former issue is solved by adjusting the type of fixture you install LED bulbs in (or losing the fixture altogether, as LEDs don’t need them nearly as much) and the latter is an ever-decreasing problem, as LEDs are becoming more-and-more mass produced and affordable. Even now, for a couple extra bucks, your 4-pack of LED bulbs will pay for themselves with a single bulb in about a year, then continue to last far longer – likely years – longer than an incandescent bulb bought on the same day would have.

One of the major criticisms to LED bulbs was once that the light was too pristine, not natural enough, or just generally felt different. Now, however, LED manufacturers have begun to perfect making LED bulbs replicate and exceed the capabilities of standard light bulbs. In fact, LED bulbs can now even be purchased to replicate vintage-style bulbs (often called Edison bulbs), that fully function on a dimmable switch and provide all the exoticl pizzaz of classic bulbs without the abysmal lifespan. It is reasonable to expect that as LED lights continue to replace incandescent bulbs in standard applications that they will take their place in other areas, including colorful, uniquely-shaped, and even more exotic or rare fixture fittings.

You’ve likely heard the claims of savings and safety features associated with LED bulbs; if you’re skeptical, then worry not, most every claim about LED bulbs is true or even understated. LED bulbs are so much more efficient, reliable, stable, and long-lasting than incandescent bulbs in nearly all situations, that there really are almost no reasons to not choose LED over your standard bulbs. In fact, it is likely not worth waiting for your current bulbs to die, but, instead, upgrade your entire household now; the savings is so significant that you’ll likely save money on your electrical bill in under a year.

Whenever you need electrical work done around your Des Moines home, contact the experienced professionals at Electrical Gurus. We are proud to offer the finest licensed local electricians in the area and are always more than happy to help out on your household projects.

We all want our families to be safe at home, and there are many products to help us feel safe. While some homeowners still use traditional deterrence methods like fences, bars, and “Beware of dog” signs, there are proactive and responsive electronic security systems being used today that can be much more effective. However, as with every electronic system, improper installation or malfunctions could make them a nuisance or even inoperable, leaving your home and family vulnerable.

Motion sensors seem to be especially problematic. When they are working improperly, they can add unnecessary costs to your electric bill and disrupt your sleep and peace of mind. But there is a lot that you can do before you call an electrician.

First, make sure you read the instructions carefully. Even if you’ve installed motion sensors before, you will need to take into account the specific specifications of the one you’re installing or troubleshooting. In addition, here are some tips that may solve the issue:

Enjoying your back deck after dark is something that many homeowners may appreciate. However, many lighting options, such as floodlights, attract bugs and really do nothing to improve the overall ambiance and atmosphere of your property. A better option is to consider the options in accent lighting including low-voltage or solar lighting. An electrician in Glendale, such as one of the team from Electric Connection, can help you choose the right garden lighting and begin the installation process.

On a warm summer night, what is more relaxing than sitting out on the deck?  There are a variety of options available to create the perfect effect for your deck. There are lighted post caps that provide just the right amount of lighting or there are under-step and riser lights that add needed light without taking up space.

Safety and security is another major concern. With the right lighting, you can add an element of security to the rear of your home making it less attractive to thieves or miscreants. Additionally, with plenty of lighting, you are less likely to have falls and other accidents outdoors.

All of these benefits come together to mean that deck lighting is something you cannot live without adding to your home. Consider all these benefits paired with the relatively low cost of installing this lighting and you will find this is a simple way to add value to your home too.

While it may be possible to handle some of these installation tasks yourself, calling the experts in electrician Glendale—Electric Connection will give you the best possible results. If you have any questions or concerns about deck lighting, give us a call or contact us online today and let us work with you. We want to make your deck a comfortable place for you to enjoy with your family and friends.

I have a great deal of interest in digital photography, but my life is as crazy as anyone else’s. My son, family, and work keep me busy from dawn to midnight every day. I’ve never had time to cultivate any photography skills, even though I’ve always been very interested, sitting on the edge of my seat, if you will, for a chance to take some digital photos in order to learn a little about how capturing light can create astonishing works of art.

My interview with Matthew Danser had given me my long sought “excuse” to try out some photography techniques. But it also required that I put in an honest effort. The thought in the back of my head: These photos are going to suck. Probably a lot. And they will most likely be seen by the thousands of people who visit this blog monthly. Second gulp.

But I’m the kind of person so riddled with ADHD that even my paranoia about being judged on a mass scale can only last about three minutes before the audacity to try anything resurfaces and action is taken. So here’s what happens when a total amateur who has no idea what he is doing tries to “Paint with Light.”

A one-dollar flashlight from – you guessed it – the Dollar General. One dollar. Even. Gotta love it. Especially since it’s all I could afford, seeing as how I’m still paying off the aforementioned Nikon that I bought to take photos of our baby son. (True, a million pictures have been taken of him during his first year-and-a-half on Earth. However, 999,999 of those photos were taken with an iPhone. Go figya.)

THE PLAN, STAN:

The plan was to wait until it was dark in the apartment and do some light painting. I knew that I could use the Shutter mode on my camera to set it to take exposures of up to thirty seconds. I saw that my camera also had an option for bulb release, so, invoking Danser, who recalls how his girlfriend had to hold down the button on his camera for a full thirteen minutes, I determined that if I asked really nicely, I might be able to persuade my wife to hold down the trigger to get exposures longer than thirty seconds. Otherwise, thirty seconds was my window of time to do all the light painting I could.

I started off pretty timidly. I had seen photos online in which people used long exposures to create squiggly lines. The most popular examples are pictures of traffic at night, headlights and tail lights streaming, giving you a sense of the fluid motion of busy intersections. You’ve also seen those nature pics in which streams and rivers and clouds and stars become gauzy with movement because of long exposures.

But what I really like about Danser’s work is the use of color. The effect of running inside the hut and popping off red-gelled flashes shown at the beginning of this blog post (Matthew Danser! And happy lightpainting, everyone!