When you are using an electronic device and need to charge it, you look for the closest power point to plug it in. There are times when you just can”t find a plug point within easy reach; that’s when you look for an electrical extension cord and plug in the device you need to charge.

This is something most of us do as a matter of routine and we don’t give much thought to it. Extension cords are undoubtedly a very handy tool that solves some very basic charging problems. When there is a shortage of outlets or if an electronic device is just a little too far from the closest electrical point, these extension cords prove very useful.

However, it’s important to keep in view the fact that an extension cord isn’t meant to be a permanent electrical fixture; it’s to be used for a specific reason and it can be hazardous to use them incorrectly.

Here, we talk about the different hazards of electrical extension cords and how they can be avoided:

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

Tired of breaking the bank just to keep up with the Joneses? Forget fancy cars and other status symbols. How about a way to maintain a friendly neighborly competition that actually involves saving money instead of spending? Americans have a wealth of resources at their disposal to empower families to cut back on energy consumption and reduce their electricity bills, but we don't do a stellar job of taking advantage of that information. Recent research, however, has shown that homeowners are more likely to take efficiency measures with their electrical work when they can compare their own consumption to that of their neighbors.

Whose Bill is the Lowest?

The experiment took place last summer, when the Vermont utility company Green Mountain Power worked with Opower, a software company that specializes in behavioral economics. During very hot days when air conditioning use was expected to be high, the utility reached out to customers with tips on reducing the amount of energy they need to power their home electrical work.

Afterward, the utility gave a report which ranked households in the neighborhood based on how well they had done on cutting back. By the end of the summer, electricity consumption among Green Mountain customers had dropped by five percent during hot days. That's some serious savings!

Peer Pressure at its Best

That five percent resulted from simple behavioral changes like bumping the thermostat up a few degrees and using curtains to block out sunlight during the hottest part of the day – no major investments or new equipment needed, just a little peer pressure. This research should be useful in helping understand what motivates people to save energy in order to develop more effective outreach programs for utility companies around the country.

One of the big takeaways is that the utility didn't give its customers any kind of incentives or payments to change their behavior – just the money they saved through efficiency, and the bragging rights of being more conservation-minded than their neighbors.

"Some of the decisions we make are not entirely rational, and they are due to a lack of context," Kevin Hamilton, Opower's vice president of marketing, said to Utility Drive, "and by providing that context you can encourage individuals to adjust their usage in ways that can benefit both the customer and the utility as well."

Little Changes Mean Big Savings

People come up with all kinds of reasons not to implement efficiency measures: It costs too much in initial capital, they are too busy to think about it, or they simply don't think the savings are worthwhile. But the reality is that even making small behavioral changes can add up in the long run.

If you want to decrease the cost of your electrical work and impress your neighbors, have a qualified home services technician perform an energy audit on your house to identify the most cost-effective ways for you to cut back.