RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Electrical repairs are best left to the professionals, but you have to know what you’re looking for in an electrician to be sure you have the right person for the job. It can seem tricky, but here a few tips for making sure you’re hiring a professional you can trust.

A good electrician will be upfront about their licensing information and the type of work they are permitted to complete under that license. You could be held responsible for hiring the wrong type of electrician. Even if things appear to go smoothly, you can’t be sure you electrician was trained for the job he or she just completed.

It’s important to make certain your electrician is insured. You can always ask to review insurance policies to check that they are current and will cover the type of work you are asking to have done.

Make sure that the electrician you are hiring has experience with a similar assignment. If they have completed projects like yours, check to see they come recommended by former clients.

Often you can get an estimate from an electrician based on the job as you describe it. Invite them to see the space, and describe in the best detail you can what you would like to have happen. While some electricians do upcharge in the process, sometimes their legitimate estimates are too low because of how the job or location has been described during an estimate.

Ask for an estimate and a breakdown of the costs from more than one electrician. It will help you get a better understanding of what to expect from the process and you’ll be able to see which electrician is offering the fairest price for both parts and labor.

Looking to buy or rent the perfect vehicle for your summer vacation? You might want to consider going electric. From reducing carbon emissions to improving air quality and limiting noise pollution, electric cars are a great alternative to regular vehicles and can save you money on gas! The benefits of an electric car surpass the benefits of other vehicles while helping the environment. Here are a few reasons why using an electric car will be great for your summer vacation!

Greener Alternative

According to EPA estimates, transportation accounts for 28 percent of U.S. greenhouse gas emissions, 80 percent of that belonging to automobiles and trucks. How much are you contributing? While electric cars produce slightly higher manufacturing emissions than traditional vehicles, after you consider vehicle manufacturing, fuel combustion and fuel production, the carbon footprint of an electric vehicle is nearly half that of its gas-powered cousin – 300g CO2e/km for the average gas vehicle versus 180g CO2e/km for electric. This protects not only the environment, but your wallet as well!

Increase in Charging Stations

The number of charging stations available for electric cars across the U.S. is increasing in response to the surge in popularity of electric cars. More than 9,500 electric stations and over 24,000 charging outlets are available across the country, searchable by zip code. Since 2010, more than 18,000 stations have been added, including free, pay-as-you-go and monthly subscription style services. Many states are also rolling out tax incentives to increase accessibility to charging stations at home and during travel.

Electric vs. Gas Power

Powering electric cars is cheaper than fueling cars that operate on gasoline. Solar and time-of-use (off-peak) electricity pricing also decreases the costs of operating electric vehicles, and available government grants and tax incentives can greatly reduce the sticker price. Add to that the fact that electric vehicle prices are continuing to fall while gasoline prices continue to rise, and you’ve got a recipe for some serious saving!

No Tailpipe Emissions

Nearly all credible researchers believe that electric cars, even in coal-dependent regions, have a smaller environmental impact than conventional vehicles. In regions with a strong grid mix of renewables—such as hydro, wind and solar—or for electric car drivers with home solar, the emissions benefits are dramatic. You can expect some analysts to argue the opposite. But it’s undeniable that electric cars don’t have a tailpipe, and therefore provide a real benefit to improving air quality for you, your family, and your community.

Home Recharging

If you decide to purchase an electric vehicle, there’s a good chance you’ll never have to go to the gas station again. All you have to do is pull into your garage or driveway, reach over for a plug, and push it into the charging inlet. It’s very convenient and takes all of about 15 seconds. Wake up the next morning, and you have a car ready to go another 80 to 100 miles—or double that, depending on the model. That’s plenty for everybody except interstate travelers. (The charging task can be more difficult for people living in condos and apartments, but access to multi-family and workplace charging is improving every day.)

Renting an electric vehicle for your summer vacation could save you a lot of money and trips to the gas station. This will leave extra money in your pocket for other fun things to cross off your vacation bucket list. Who knows? You may end up loving your experience with an electric vehicle that you’ll probably buy one when you get back from your vacation!

Today’s modern floor plan is very open, which means your lighting should be cohesive throughout the home in both style and light quality. Do you prefer cool lighting or warm lighting? If you prefer one to the other, make sure the bulbs you select for your home lighting give the same light temperature.

The lights in the entry of your home should welcome guests as well as adequately illuminate the space. If your entrance has high ceilings, consider installing an elegant chandelier. If you have a single-story foyer, try adding a lighting fixture that sits flush or almost flush with the ceiling. Pair it with two wall sconces on either side of the front door.

Light adds visual interest to an area. When deciding on how you plan to light your space, consider these three lighting layers.

Dimmer switches add variety when lighting your room. Dimmer switches can be a great addition to your dining room, which can serve as a place for the kids to work on homework during the day and a gathering place for dinner parties in the evening. The dimmer switch allows you the versatility you need to have that bright light for the kids and a softer, subdued lighting for the grownups.

If you notice your kitchen is a bit dark, or you simply want to add more visual interest to your home, adding counter lighting is a great solution for this. Not only does it provide visual interest, but it also provides ample light for kitchen counter tasks.