Most of us have batteries stored in a drawer or cabinet somewhere in our home. They are used for a number of different applications including clocks, remote controls, and toys. Batteries do create electrical current, so while these small devices can appear harmless, improper use can lead to dangerous results. Make sure you are conducting battery use in a safe and proper manner.

Ensure batteries and contacts are clean – Before using a battery, make sure that the battery is clean and the connections of the device are also clean. Any dirt or grease can cause the battery to not connect properly to the device or allow a path for the current to leave the device. If corrosion appears to be building on either the battery or the device it should be cleaned or disposed of properly. You can use a cloth to wipe away any debris or build up on the battery and device connector. 

Dispose of batteries correctly – Batteries are filled with hazardous acid. Once a battery is used up it does not mean that it is safe to throw into the garbage can. Batteries can still leak and cause hazardous chemicals to spread. Batteries should be recycled at locations that accept them, such as Staples and Best Buy. They will ensure that batteries are sent to the right place for recycling. 

Avoid damaging or using damaged batteries – Again, batteries do contain hazardous chemicals inside. It the battery is punctured, crushed, or heated the acid can leak or explode. If this acid comes into contact with your skin or eyes, it can pose serious health risks. Keep children from handling batteries in the event that they misuse the battery. If you find a damaged battery, avoid using it in any household device. Wrap the battery up and bring it to a recycling station. 

Match the polarity correctly – While many of us check to make sure that the positive (+) and negative (-) symbols are connecting correctly in the device, it can be overlooked at times. If you put a battery backwards in a device it may still function but there could be venting or leaking. The polarity indicators are there to let you know how the battery should be used. Ignoring these prompts can lead to damaging the battery and the serious hazards discussed earlier.

Batteries are a wonderful invention that allows us to generate small amounts of electricity for mobile devices, but mishandling them can be dangerous for our health. If you have questions about electrical devices or use in your home, contact your local Expert Electric to get the assistance of a licenced electrician.

When you walk into a room in the house, you flip a switch and the light comes on. It is a standard, expected feature. It is actually a little boring when you think about it. Your light looks just like the lights in every other room in every other house. Maybe you enjoy being a little different or appreciate making a statement. Dramatic lighting schemes are one way to make your house just a little different from the rest. A Los Angeles electrician, like those at The Electric Connection can help you achieve your goals of having a lighting scheme that enhances the room and will get guests talking.

There are so many options. If you have gorgeous artwork that you want to be the focal point when the lights are turned on or a particular corner that is meant to draw the eye, you need the right lighting. You don’t have to stick with the standard white light. You can have fun with it and add a splash of color or put the boring white light in a flashy fixture. An electrician in Los Angeles can pretty much install any fixture that catches your eye. Your biggest job will be doing the shopping and finding the right chandelier, wall light or recessed light.

The rest is up to your electrician. Los Angeles residents will appreciate how quickly a single change in the lighting scheme can change the look and feel of a room. Whether you want to go bold and bright or soft and subtle, it can be done. In fact, the light fixture changes can happen in just a few hours, assuming the wiring for the fixtures is already available. If it isn’t, no problem. New wiring can be added along with a new switch. Make the call today to The Electric Connection and transform your boring lighting into something fun and exciting.

In most cases, the water for showers or baths are heated using a water heater in the basement or other area of the home. However, there are certain situations where this is not practical. Especially if you travel, you may come across electric showers.

An electric shower has a special shower head where the water is heated directly at the point of use. There are pros and cons when it comes to these devices. Learn more about an electric shower and find out if one may be the solution to your warm shower needs.

Pros

An electric shower works well in homes that have low water pressure because the electric shower also has a built-in pump to increase the pressure. Additionally, if you are trying to conserve energy, an electric shower uses less electricity than a water heater that is constantly heating the water whether it is being used or not. A final benefit to using this type of shower is that in areas where the temperature is cold, a traditional water heater may not be able to get the temperature as high as it needs to be.

Cons

The only main con to using an electric shower is that it requires some additional electrical work, (Click Here). Luckily, if this is something you want done, contacting The Electric Connection, an electrician Glendale, is an easy way to get the job done. Some people worry that having electrical parts near the shower is dangerous. However, there is a grounding wire, and if the system is properly connected there is no more risk using this shower than there is with any other shower.

If an electric shower is something you wanted to add to your home, call an electrician in Glendale from The Electric Connection today, and let us help you with the choice and installation of an electric shower.

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

             In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!