Any wire that is referred to as “live” or “hot” is one that is carrying electrical current. If you come into contact with a live wire, it can result in electrical shock, because the body will function as a ground and the electricity will flow across the path of least resistance (your body) to reach the ground. If there are exposed electrical wires near you, whether in your home our outdoors, you must exercise caution. Always assume that any downed electrical wire is live.

Live wires in your home are normally color coded, according to the region that you live in. This means that the live wire in your electrical system could be black, brown or red. This lets you know that the wire that you are looking at could possibly be energized with electrical current. In your home, this live line is always balanced out with a “neutral” wire. The electricity will enter your appliance from the live wire and exit through the neutral wire.

Because of the way that electricity flows through a circuit, it is important to remember that both live and neutral wires can be energized with electrical current. In order to increase the safety of many appliances, it is common for an electrician in Glendale to install a polarized outlet, where one hole in the socket is larger than the other. These holes correspond to properly sized prongs in your power cords to ensure that you are providing live power to the correct part of the circuit. To further improve safety, some outlets also include a ground connection, giving any excess electricity a safe path from your electrical system into the ground. This connection can greatly lower your risk of electrical shock.

If you have any questions about grounded electrical systems, live wires or any other electrical issues, head on over to our website at www.theelectricconnection.com/.The Electric Connection is always more than happy to help.

Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.

With little ones crawling around the floors, it is hard to always keep an eye on what they are doing all the time. Electrical outlets are at the perfect height for them and seem to be the most interesting thing to investigate. This convenience leads to hundreds of children suffering severe shock (electrocution) each year. This is why tamper resistant outlets are so important. If your home is missing tamper resistant outlets, it may be time to upgrade.

A tamper resistant outlet looks just like a normal outlet, to the untrained eye but have important mechanisms behind the plastic to ensure that nothing foreign can find their way into electricity. Behind the two top prong holes is a small plastic panel. This panel slides across to cover the prong holes. If a child approaches the receptacle with a key or other narrow object with the intention to insert it into the outlet, the plastic panel will prevent them. No matter how much force they apply, it will block the foreign object from entering the outlet and allowing electrical current to escape.

If this plastic panel is preventing objects from entering the prong holes, how do you plug in your normal devices then? The trick to this is that pressure must be applied equally through both prong holes in order to slide the panel to the open position. If there is uneven pressure, the panel does not move. This is how it can prevent paperclips from entering, but operates seamlessly when plugging in a lamp.

Tamper resistant outlets can prevent serious injuries to children. If you have a young one making their way around your home and you aren’t sure if you have tamper resistant receptacles, now is the best time to check. Contact your local Expert Electric at 604-681-8338. We can help to identify what kinds of outlets are used in your home, and upgrade them if needed.