As a Dallas Electrician will be familiar with standard wiring practices and will know the proper way to test the circuit that they will be working on to ensure that it is safe.

Another huge benefit to using a licensed electrician for your home electrical work is that they will be well versed in all of the building and safety codes required to make sure the job is done right. The reason that this is important is two-fold. First, it is legally required to adhere to all building and safety codes, and if you ever intend on selling your home or having it inspected for any other reason, a DIY Electrical repair or addition will cause your home to fail inspection if building and safety codes are not followed to the letter, generally costing you more money later down the line to have an improperly performed job repaired. Secondly, and even more important, is the fact that building and safety codes are put in place for a reason. If you are not familiar with these codes or do not follow them, you are putting yourself and your family at risk of electrical shock, electrical fires, and injury or death due to a faulty repair.

If you own a computer, then keeping it protected is one of your foremost concerns. There are a number of ways that you can achieve this, though electric can be rather vindictive when it puts its mind to it. As with anything, safety should be a priority, and a surge protector is a good first step to take in keeping your computer intact. The question you need to ask however, is what type of surge protection you would like to have for your computer. A UPS, or Uninterruptible Power Supply would be a great choice, and it has a number of benefits:

As the world becomes more and more reliant on computers, it becomes necessary to ensure our electronic lives are not tabled due to an outage. A UPS is not going to last forever, no doubt about that, but it will serve to get you through the worst of times. One of the most popular brands out there is APC, and you can find several others on the market to meet your growing needs.

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.