As we transition into Fall and Winter, there will be plenty of new outdoor activities for everyone to enjoy. It is important to remember that, there will also be new challenges associated with outdoor electrical safety. The piling of up leaves and falling of snow can create unpredictable electrical hazards around the home. Keeping safe while outdoors doesn’t have to be complicated. Practice proper electrical safety by following these 4 Expert Electric outdoor electrical safety tips:

It’s always a good idea to semi-annually audit your home’s outdoor electrical equipment, especially in between Winter and Spring and then again in Summer and Fall. This ensures that your home is fully prepared to take on any electrical hazards that could occur during severe weather and temperature fluctuations. A licensed electrician can can easily complete this audit for you; however, it’s also possible to undertake this task on your own if preferable. During this audit, ensure that all outdoor electrical equipment is not only functioning properly also stored properly.

Loose or damaged electrical wiring can pose a serious electrical threat to your home, especially if it comes into contact with snow or leaves. A thorough inspection of all wiring and electrical cords should be completed and followed up with a replacement if necessary.

Melting snow can often result in large amounts of water pooling on the ground. If this water comes into contact with electrical equipment and wiring, the equipment and entire home can be at risk. It’s best to plan ahead and ensure that all electrical equipment, wiring and cords are placed and stored so that they won’t come into contact with water sources.

When in doubt, it’s best to contact your local licensed electrician to ensure that your home or building is safe from outdoor electrical dangers. The team at Expert Electric can inspect all of your outdoor electrical equipment and appliances such as hot tubs and pools, ensuring that all of the necessary outdoor electrical safety requirements are met.

Have any questions about outdoor electrical safety or and of our electrical services? Please fill out one of the forms on our website. We are happy to answer any questions you may have. The Expert Electric team of licensed electricians is here to ensure all of your outdoor projects are handled safely. Call us today at 604-681-8338.

There is nothing more important than keeping your family safe, and one of the best ways to provide protection for your Des Moines home is with the addition of security lighting. Adding lights and motion sensors to the exterior of your home will provide greater protection, deter home intruders, and when installed professionally, can even improve the curb appeal of your house.

One of the best places to add additional lighting to your home is along the driveway. Not only will your driveway become a grand entrance to your home, it will eliminate the chances of someone hiding in the shadows. Additionally, placing additional lighting in your backyard has the same effect; the goal is to eliminate dark areas on your property that give crooks a place to hide.

Most homes with porches already have some sort of lighting, but with the addition of motion sensors to entryways, you can increase the level of security provided while minimizing the amount of electricity being used by your home. While it may be excessive to leave the lights running full blast throughout the night, motion sensors will shine a light on anyone attempting to enter your home.

There are plenty of security lighting kits available on the market, but which one is right for you? When you contact Electrical Gurus, we can design and install specialty lighting for your home that will increase the security and accentuate the look of your house.

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

Your local electrician can handle a wide variety of jobs including powerpoint installation, switchboard upgrades, outdoor lighting, installation of electrical fixtures, CCTV installations and a lot more. While they handle all these jobs expertly, they can also handle new wiring installation and wiring upgrade projects. Here are some signs that indicate the wiring on your property needs an upgrade:

If you live in an older home which has wiring that’s over 15-20 years old or have moved into a home and have begun noticing too many current fluctuations, it’s important that you call in a skilled and licensed electrician to check the wiring on your property. If you have lived in the same house for over a decade and can’t recollect when you last got the installations inspected and tested, don’t defer calling in an electrician to conduct a thorough inspection.

Take a look the outlets in your home; check whether they are 3-pronged or 2-pronged. If you find there are various 2-pronged outlets on your property, it’s time for you to call in an electrician. These outlets are undergrounded and can pose a fire-hazard. You would have to get these replaced with 3-pronged ones and ensure that these are grounded. The other alternative is to replace these with GFCI outlets as this will help protect your property. Your electrician will be able to evaluate your property’s needs.

Many homes that were built in the 1960’s & 1970’s had aluminum wiring instead of the safer copper wiring. The former is prone to loosen over time and this increases the fire risk in your home, whenever any outlet is in use. When you get the wiring on your property inspected by an electrician, he would be able to tell you if there is any risk and will provide a suitable solution to the problem.

Modern day appliances are power-guzzlers and modern wiring systems are specially designed to bear these loads. However, any installation that is a few decades old is unable to bear the load of modern appliance such as washing machines, dishwashers etc. If you have more than one heavy appliance operating on one electrical circuit in your home, that can pose another problem. The excess load causes the older wiring to get heated which in turn melts the insulation around it. This exposed wiring results in arcing (hissing, humming sounds). If you ignore these signs and don’t get the installation checked in time, it can result in an electrical fire.

In most instances, wiring upgrades go hand-in-hand with switchboard upgrades. This is because decades’ old wiring systems also had older switchboards with fuse installations. If you find that the fuses in your home keep blowing very often, that’s another indication that your electrical wiring may need to be upgraded.

The electricians will replace the fuses with modern safety switches/circuit breakers. This improves the safety aspect of the electrical installations in your home. When you are getting any electrical work done on your property, it’s important that you hire the services of experienced and licensed professionals that provide guarantees for their work.

If you have noticed any of the signs we just discussed and feel your property may require a wiring upgrade, call AllRound Electrical without delay. Regardless of whether you want to get an electrical fixture installed or need complete rewiring done on your property, we are the professionals to hire. For any information about our services, feel free to call us at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263