MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save

How to Choose the Right Sized Chandelier for Your Home

Chandeliers are designed to float in a room as an important part of the decor. Too large and this fixture will overpower the space. Too small and it will look out of place as an afterthought.

“Placing a chandelier that is too small in a space is likely the biggest mistake because it’s very noticeable,” says Joe Rey-Barreau, educational consultant for the American Lighting Association (ALA) and assistant professor of interior design at the University of Kentucky. “Great designers, therefore, tend to make their decisions on fixtures that may appear slightly larger than might be appropriate. It’s generally always best to make the mistake on a fixture being too big than too small.”

Capitol Lighting offers a wide range of modern chandeliers to crystal and Italian chandelier styles to choose from.  Whether you are purchasing an Italian chandelier or a modern chandelier, size matters! To make sure your chandelier is the right size for the room in which it will hang, consider the following questions:

1. How high is your ceiling? Taller ceilings demand larger chandeliers. 4. What is the form and design of the chandelier? Light, airy fixtures tend to look larger.

To have all of your chandelier questions answered, visit one of our seven Capitol Lighting showrooms today!  

Almost 2/3rd of Americans decorate there home with some sort of electric lights during the holiday season.  Over half require the use of some sort of extension cord and or power splitter during there holiday lighting decoration process.  The National Fire Protection Association (NFPA) Reports that Christmas tree fires alone cause on average an estimated $16.2 million in direct property damage, 16 injuries, and 6 deaths every year.  This statistic does not include injures or deaths due to outdoor lighting electric shock or fall injuries such as ladder work.

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

 In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!