Lights are one of the greatest things about the holidays. You’ll find them in trees, colorfully decorating home exteriors; you’ll even find them on vehicles. And honestly, we love it. Lighting is one of the keys to the spirit of the season and an integral part to this time of the year. But, as we’re all well aware, they aren’t exactly the easiest thing in the world on your energy bills.

Looking for ways to keep your holiday lighting costs at a minimum this year? With more than 25 years of experience and knowledge, we can give you a hand! Sit back, relax, and let the certified electricians at Hoffman Electrical show you some quick and simple ways to lower holiday lighting costs!

Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

We’re excited to offer a new line of LED flood lights in 50, 100, 200 watts with various color temperature options. The durable, compact flood lights can be used for many landscape and industrial applications, including parking lot lighting, billboard lighting, tree uplighting, flagpole lighting, and architectural wall washing.

These LED lights emit from 3,500 to 25,000 lumens of illumination in a wide 120-degree beam pattern. They’re available with warm white, natural white, or cool white LEDs and are designed to last three times longer than HID fixtures.

Each durable, weatherproof flood light has a die cast aluminum housing with an integral LED-cooling heat sink and a tempered glass lens. The LED flood lights are also equipped with UL-Recognized constant-current drivers and adjustable brackets that allow for illumination where it’s needed.