Last night, thousands of walkers and hundreds of runners in Edinburgh kicked off the Courtesy of NVA.org.uk

A bunch of research went in to creating this light up gear to meet the NVA’s head designer James Johnson’s following standards:

For the runners, the design team wanted something dramatic, so they ended up going with concentrated point source LEDs, which looked great both close and at a distance. The LEDs allowed them to mix color and adjust intensity of the lights remotely. The runners themselves had to be in tip-top shape, able to run 10 miles at a 9-10 minute pace in all kinds of weather. Therefore, as to not hinder them in their physical feat, the design team fashioned a webbing suit out of the LEDs, complete with a radio and battery pack. Check them out:

The only shortcoming of these suits was that they couldn’t be powered by the runner’s motion. After attempting to harvest energy via knee braces, they determined any impediment to the runner’s motion dramatically affects his or her performance.

For the walkers, Johnson and his team wanted to build something subtler, to provide adequate safety lighting, but not to distract from the viewing experience. They decided to go with staffs/walking sticks illuminated by a combination of electroluminescent tape, fiber optic fabric, and diffused and non-diffused LEDs. Each staff housed a micro-computer that would synch up the flashing patterns with the Orchestra’s score, with changes triggered by movement and altitude. And here they are:

The research team was able to use motion to generate power in this instance, since walking is a more leisurely, steadier movement. To harness the power of movement, two LEDs, two high power Neodymium magnets, and a copper coil go in the top of the staff, then as the walker strides along, striking the stick against the ground, one of the magnets oscillates through the coil, creating a small electrical current. One LED lights up when the magnet travels down, and the other when the magnet travels up, producing a twinkly effect.

The runners also received a smaller version of this staff in the form of a baton.

Ask any parent what they spend a large portion of their day doing and many, if not the majority, are going to say worrying. There are loads of potential dangers out there, and as parents we are vividly aware of all of them. They exist everywhere, and we can’t really mitigate literally all of them. But we certainly have control over the dangers in our homes!

Wondering about childproofing your outlets and how best to go about it? The team at Hoffman Electrical has you covered! Our certified professionals take safety as our number one priority, and we can give you the lowdown on what works, what doesn’t, and how you can make your home safer for you and your children.

The question is a simple one, but the answer takes a bit of doing. There have been many types of “childproof” outlets or safety measures offered throughout the years. Some are great and work as well as anyone could hope. Others, on the other hand, are a bit lackluster.

These methods offer some protection, but don’t tend to do as well as anyone would really like:

The trouble with these solutions is that kids are super curious. Outlets are a strange, interesting thing that is right at their level and they see us fiddling with them all of the time. Bottom line, simple covers aren’t going to dissuade an inquisitive mind.

Every summer, more and more homes experience outages in their electric systems. As a top Dallas Electrician, my electricians and I see the effects of these outages every day. They can be devastating, and cause a lot of damage.  In fact, the insurance industry pays out over $1 billion in damages annually in claims caused by outages and power surge damage. Most outages are caused by the weather, but there are different kinds of weather can cause an outage. This even includes weather that doesn’t produce lighting damage like the massive ice storms we saw during Super Bowl week this year that left hundreds of thousands without power (and, more importantly, without heat!) during one of the worst winter storms in years. Summer storms can produce devastating tornadoes that can knock out power for miles around the area they touch down in, and many hurricanes begin to build in the summer and early fall, causing catastrophic results even outside of the disaster zone. Hurricane Ike left over two million people without power when it hit southeast Texas in 2008, and not all of them were in the impact zone.

Not every outage comes from something as dramatic as a hurricane or tornado.  A lightning strike, even as far as half a mile away, can potentially cause damage to your delicate electrical equipment and appliances. Often, large-scale outages can occur when lightning strikes a transformer.

Outages don’t just occur because of bad weather:  many outages are caused by power equipment switching to accommodate the heavy load people put on the power grid.  Our power grid is already having trouble with its current load, and the problem only grows as more and more people use more and more electricity.  Summer in Dallas and Fort Worth is the perfect examples.  It’s when people are running their air conditioners constantly. This puts an incredible load on local and state power grids.  This leads to government agencies putting out warnings almost every summer about potential power outages, threatening brownouts and blackouts unless people conserve energy.

These outages aren’t damaging in themselves, but they leave open the possibility for electrical power surge damage.  You’ve probably noticed that when the power comes back on after an outage, it often flickers on and off quickly as the power grid attempts to get the electricity flowing back into your lines.  This stop-and-start action creates surges that can easily damage unprotected electronics or appliances.  Having a nice TV damaged like this is a very expensive hassle, and you can imagine how much more expensive and uncomfortable it could be if the surge takes out your air conditioner and refrigerator!

So, what can you do to keep power outages and power surges from affecting you?

Some of these options can even help you save money on your electric bill without the hassle of gas, fumes, or noise pollution.

As safe as we may feel in our own homes, it doesn’t hurt to add an extra layer of safety and security. Security lights can go a long way to making your home a little safer. Well-lit homes are deterrents against crime. Perpetrators are less likely to lurk in landscapes that are bright with no dark corners. Walking through your yard or from your car to the front door can also be dangerous if you can’t see well. An electrician in Glendale, like those at The Electric Connection, can help you make your home a little safer by adding security lighting.

You can opt to have the bright flood light variety or the kind that is a little dimmer, but just as effective. Security lights mounted above your driveway, your front door or your back door are all great places to place the lights. Motion detectors or timers are ideal and ensure you will never have to worry about stepping out of your car or your house into the darkness. An electrician will help you set the timer to meet your needs.

A Glendale electrician will need to wire the lights directly into your home’s main power. This is called hard-wiring and ensures the lights are always on. However, you can choose to have your security lights installed with a switch. This gives you the freedom to turn the light off and on whenever you need it. Part of your upgraded security lighting system can also include landscaping lighting. Lighting up darkened areas under bushes and in dark corners can help you keep other unwanted pests out of your yard. Nocturnal creatures will be less inclined to hide in an area bathed in light. If you would like to brighten up your outdoors, give The Electric Connection a call today.

Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!