Many of us have considered underfloor heating, especially when we step into the bathroom during a harsh Des Moines winter. Today, our electricians will share many benefits to underfloor heating that you may not have considered. You may find that there is more to underfloor heating than simply a warmer bathroom floor (although that is nice).

Underfloor heating spreads evenly dispersed, rising heat throughout your room’s flooring; heat emanating from the floor warms the air, which then rises toward the ceiling before cooling and falling, only to encounter more warm, rising air. This creates a pocket of cool air stuck in the ceiling of your room, leaving the space from floor to head height a comfortable, warm temperature. Additionally, since the heat doesn’t come from a single source (vent, radiator, etc.), there are no hot or cool spots in the room, the entire space is even heated.

Each room that has an underfloor heating system installed will have its own corresponding thermostat, which effectively removes the need to heat each room to achieve a desired temperature in a single room. For instance, during the night, your home could be relatively cool, except in bedrooms; likewise, certain floors can be kept at a cooler temperature when not in use during daylight hours. This can heavily cut down on energy costs when compared to inefficient whole-house heating systems.

The homes of today are more open and airy than ever, with open-concept living dominating real estate markets across the country. Open spaces are notoriously difficult to heat with radiation or forced air systems, which can create undesirable warm and cool zones in the space. By contrast, underfloor heating works excellently in larger, more open spaces.

In addition to the better, steady stream of heat found in your rooms, you will enjoy a comfortable warming underfoot. While this may seem like a feeling reserved for luxury homes, many other countries use underfloor heaters almost exclusively in new construction for its comfort and efficiency. You will no longer have to hope and wait for the furnace or radiator to kick on for warmth to flood your room, instead you will enjoy a steady stream of warmth coming from beneath.

If you’ve ever renovated a home with radiator or ventilation heating, you’ve undoubtedly had to deal with relocating or working around existing HVAC lines. Unlike traditional heating systems, underfloor heating poses little-to-no issues when renovating or remodeling your rooms. Plus, since professionally installed underfloor heating is compatible with most flooring types, you won’t find yourself limited in choices for placing an all-new flooring over your heating system.

Underfloor heating may require a bit more planning and investment to install than fixing an old furnace system would, but the benefits you can gain by adding it to one or more rooms in your home are worth the effort. Be sure to consult one of our Des Moines electricians with your plans for underfloor heating prior to construction for best results, advice, and electrical installation.

Get in touch with our Des Moines electricians today!

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

Having smoke alarms is one of the essential ways you can protect your family in your home. The NFPA (National Fire Protection Association) has estimated that nearly 70 percent of those who perish in a house fire were in homes where there was no smoke alarm. Additionally, it is estimated that nearly one thousand deaths per year could be prevented by installing smoke alarms in every home. Learn more about the considerations you must make regarding smoke alarms and then call a Los Angeles electrical company, such as The Electric Connection, to install this important device today.

Building Codes

There are building codes that mandate the installation of smoke alarms. These are developed at both the state and local level. Since there are so many codes and requirements you must keep in mind, it is recommended that you find an electrician in Los Angeles that has a thorough knowledge of NFPA 72 – National Fire Alarm Code as well as these local ordinances.

Location

It is important not only to have a smoke detector, but also to install enough and install them in a proper location. It’s important to install the number of smoke detectors that are required in your area. Additionally, connecting the detectors, means that there will be an early warning if a fire breaks out in another part of the home. When working with an electrician, Los Angeles residents should request that the detector be mounted on the ceiling or high on the wall.

Power Source

A smoke alarm can operate on batteries, electrical systems or a combination. An alarm that operates on both is most desirable, since it protects you even if there is a power outage or dead battery situation. Testing your smoke alarm regularly is vitally important to make certain it will be there for you when you need it.

If you want to talk to a Los Angeles Electrician about installing a smoke alarm system in your home, visit us at ElectricConnection.com or call us at The Electric Connection today.

A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.