Spring brings plenty of wild storms to the area and hopefully with those thunderstorms, there will be lots of rain. When the dark clouds form, you can prepare for thunder and lightning and the possibility of a power outage. During a thunderstorm, there are some things you need to do to stay safe. Although lightning striking a person is rare, it does happen more often than you would think. Lightning can also come through phone and data lines into your house. An electrician in Burbank has some tips for you when it comes to staying safe in the next thunderstorm. You can always call The Electric Connection if you have any more questions.

If you are at home, take the following steps.

*Unplug any electrical appliances you won’t need *Do not take a shower or bath during a thunderstorm

You can have a whole home surge protector installed by a Burbank electrician to prevent the need to unplug appliances. The surge protector will prevent power surges from damaging appliances.

If you are outside, seek shelter if possible. Sitting in a car is safer than standing in the open. If you are in a boat or at the lake, get away from the water. Do not take shelter in anything that could be damaged by high winds. Do not go back outside for at least 30 minutes after you hear the last boom of thunder.

Teach the entire family what to do should a thunderstorm roll in and you are not home. Consider having a surge protector or back up generator installed by an electrician. Burbank residents can count on the team at The Electric Connection to answer any questions and complete a professional installation.

The type of in-wall wiring and cables you choose for your home will largely depend on what kind of signal you need to carry, where you’re going to route the wire, and how far the signal will have to travel between your various peripherals. Whatever type of wiring you choose to go with, you want to be sure you get one that’s rated for in-wall use by the Underwriters Laboratory (UL). This is usually going to be indicated with a CL2 or CL3 rating when it comes to speaker wire and audio/video cables. A good number of Ethernet cables are rated for in-wall use as well, usually indicated with a CM, CMR, or CMP rating. When choosing the right rating for each specific type of wiring, the UL looks at a range of different factors, including the heat being generated from current flowing through the wire, how quickly the cable will catch and spread fire when exposed to flame, and the wire’s vulnerability to damage from external stresses.

It is also important to look for a cable that’s rated for your specific needs. For instance, you are going to want cable that is rated as CL2P or CL3P if you are planning to run it in your heating ducts, or if you are looking to run your cable underground to connect to your outdoor speakers, you will want to make sure your cable is rated for direct burial. It should also be noted that when you are making the decision of what custom wiring you will need for your home, you need to be aware of your local fire codes and make your selections accordingly.

When you are looking for the right type of speaker wire for your home, there are two things you need to factor into your decision: the gauge and number of conductors. The gauge of wiring you choose should depend on how far the wire is going to have to travel from the receiver to the speaker. Significant power loss can occur over long runs of wiring, reducing your system’s performance. This might not be a significant issue in a single-room setup, but it is something to keep in mind if you are looking at a multi-room system. In terms of conductors, speaker cable comes with two or four. Two should be all you need for wiring a single speaker, but if you are looking at doing a multi-room setup, or a system with volume controls, you will mostly likely want four.

No home wiring setup would be complete without a solid Ethernet setup, but knowing which type of wiring to use can be a little confusing. When you are looking to create a wired computer network in your home, or carrying audio/video and control signals all across the home, CAT-5 cables have been the standard for a long time, but a better option these days might be to look at CAT-5e or CAT-6 cables. These newer cables are able to pass more data along the wire at a much faster rate than the older wires. The CAT-5e and CAT-6 wiring options are also backwards compatible with devices that were designed to work with the older CAT-5 wiring, meaning you won’t have to buy all new equipment. Ethernet cabling actually stands up to interference better than almost all audio/visual cables, which is a large reason it has become so popular in recent years for whole-house audio/video systems. It can also be a more cost-effective option to run long lengths of Ethernet cabling than it can be to run the same length in audio/video cable.

The Seattle Mariners may have just upped their game when they retrofitted their clubhouse with an LED lighting strategy focused on intensifying the moods, energy levels and performance of their players.

In an article published in Architectural SSL, Stan Walerczyk highlights five core areas of our life where lighting effects human physiology and performance:

Circadian Rhythms — a case study by Ephesus Lighting, when the University of Phoenix replaced their metal halide fixtures with LEDs, they experienced a 75% reduction in energy consumption, a statistic that probably took the sting out of the initial investment. The long-term benefits of LED lighting (less maintenance, a reduced carbon footprint) offer less in the form of immediate gratification, but trickle their gifts throughout future generations.