Have you been struggling with what feels like a lack of electricity in your home? You don’t have enough outlets and have extension cords plugged in here and there. Maybe you have to unplug appliances in the kitchen so you can use another one. Your microwave and toaster can’t run at the same time or your breaker trips. These are all major inconveniences and at times, they can pose a fire hazard. It may be time to consider an electric panel upgrade. The crew at The Electric Connection is familiar with this particular job and can get it done professionally and efficiently for you.

An electric panel upgrade is typically needed for homes that were built before the 1980s. 30 to 40 years ago and of course long before that, homes didn’t have even half of the appliances that we have today. There wasn’t a computer, television and even a mini fridge in every room. Today, we are very dependent on the gadgets that run our life and make life easier and that means we are very dependent on the electricity needed to keep them going. An electrician in California can upgrade the panel and give you the additional electricity you need to make your home run smoother.

Once the panel is upgraded to 200 amp or higher service, you can have additional outlets installed. You can have some of the outlets in the kitchen put on separate breakers so you can run your microwave, toaster and coffee maker at the same time. You will discover the upgrade truly makes your life a little easier. You may even be able to save some time in the morning and will absolutely reduce your frustration as you work around your electrical problems. Your California electrician is ready to help. Just give The Electric Connection a call today and schedule your initial consultation.

You Can Be Liable for Unlicensed Electrical Work

07/30/15

Revamping your home's electrical work can be a big headache. You need to find a qualified electrician and write what could be a hefty check for work that might require opening holes in your walls and temporarily making a mess of your home. The last thing you want after a big electrical project is to have to tear it all out and redo the job all over again. That could be the scenario you face, however, if you cut corners and don't hire a licensed electrician to take on the task. Fly-by-night contractors might be cheaper at the outset, but they can cost you big time in the end if they don't follow the local building code, leaving you liable for the faults in your home wiring.

Fanning the Building Code Fires

Some contractors might complain about having to follow local code, but it's in place for a reason – it helps ensure that any work done on your home is performed safely and effectively. Local code standards are particularly important when it comes to electrical work, because faulty wiring and connections can lead to short circuits or even an electrical fire, putting your family at risk.

That's why technicians who do electrical work are required to maintain a license, secure permits and schedule inspections for many home projects. Unfortunately, there are electricians who are tempted to skip the code requirements in order to avoid the time and expense of compliance. They might quote you a lower price, but shoddy workmanship can leave you on the hook for a lot more money overall.

Limit Your Exposure to Liability

If your local government figures out that you are working on an electrical project, they can send an inspector to check it out. If the work isn't up to code, you'll have to remedy the problem before you pass inspection. And if your electrician isn't licensed, you have little recourse to correct the faulty electrical work besides paying out of pocket for someone else to redo the entire thing. Worse, if your electrical system does cause a fire that leads to injury or death, you could be civilly liable for huge sums.

Licensed electricians, on the other hand, have more incentive to follow the rules to begin with, since they could lose their certification if they don't. Furthermore, you may have an easier time recouping your investment in the event of unsafe or incomplete work if you can prove that you did your due diligence and hired a licensed electrician.

Good Work Done Right

To avoid code and permitting issues, hire only licensed technicians for your electrical work and ask them to show you all the relevant permits. Protect yourself and your home by holding out for competent contractors so you know the work is done right the first time.

The concept of fuel cells as an energy source is credited to a chemist, William Grove. He demonstrated in 1839 that electric current could be produced by an electrochemical reaction between hydrogen and oxygen over a platinum catalyst. Thereafter, many alternate forms of the technology emerged for producing electricity from various materials and catalysts.

The main reason why fuel cell companies have not been profitable is due to startup and operational costs. Although fuel cells provide clean, inexpensive energy, it is much simpler to use coal or natural gas. These industries have been around for a long time, so their processes are now streamlined.  Unless legislative action requires the use of clean energy, the adoption of fuel cells will remain slow.

Fuel cells are attractive for energy production because they provide clean energy, with no harmful byproducts. Although commercial adoption of fuel cells remains slow, it is possible that the technology could become disruptive and make a significant impact on the energy industry. That could happen if environmental pollution due to the burning of fossil fuels becomes a global concern. So far, large countries that account for a great deal of pollution, such and China, have been indifferent about the pollution they cause.

Whether it’s a small wiring fix or a complete house rewire, at some point in time your home may need some electrical wiring. You might have a small electrical repair that requires rewiring, or maybe you’ve decided to remodel your home and as a result you’ll need to move some of the wiring.

It’s always best to hire a licensed electrician to any type of rewiring, because if you do your own rewiring you run the risk of hurting yourself or creating shorts or electrical safety issues in your home. You could also run the risk of big electric problems later on. A Glendale electrician like Electric Connection can ensure that your wiring is all done correctly and that it will function properly for years to come, giving you the sense of security that you’ll want.

Whether you’re just looking to replace some old wires or completely rewire your home you’ll want to want to make sure it’s done right, and that’s why you should hire a professional instead of doing it yourself. Electric Connection is the licensed electrician Glendale property owners look to for expert home rewiring services.