One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

Ground fault circuit interrupters (GFCIs) are common in many homes today. In fact, new homes are required to use GFCIs in certain areas like bathrooms, kitchens, garages, outdoor areas, and unfinished basements. This is because GFCIs provide a level of protection from electrical shock from things like water, which can cause serious injury or even death.

However, GFCIs do need to be reset from time to time. They are designed to shut off if they detect current flowing through an unintended path. If this happens, the GFCI will interrupt the electrical current, which will depower any devices plugged into it and possibly cause power outages at other outlets on the same circuit.

When this happens, many homeowners call us for GFCI resetting help. But you may be able to fix the issue yourself. Here is what you can try before calling the GFCI experts in Arvada.

Tips to Reset a GFCI

A GFCI can be reset without any technical know-how. There are two rectangular buttons on the face of a GFCI, which are usually One is the “TEST” button, and the other is the “RESET” button. Some GFCIs also have an LED light that may illuminate when the GFCI  trips . When the TEST button is pressed, the RESET button will pop out if it isn’t already. To reset the GFCI, simply push and hold the RESET button until it latches.

GFCI Experts in Arvada

If the GFCI will not reset using the above procedure, you’ll want to call an electrician. There could be a problem with the outlet itself or the wiring in the circuit. There could also be an issue at the breaker box or somewhere else along the line. When working correctly, your GFCIs should be reset without much issue, so, if they aren’t, there may be something else causing the problem.

Do you know one of the quickest ways to transform a room? Changing the lighting is one way to give a room an entirely new look without having to change the furniture or paint the walls. Of course, doing those two things will create a very dramatic effect. An electrician can help you achieve a new look in a single day. It is that simple. All you need to do is call The Electric Connection.

Creating a whole new look by changing out a single light fixture is actually a lot of fun. Head to your favorite home improvement store and spend some time browsing the lighting section. Looking online at different lighting techniques will also help give you some ideas of what you may like. When you are thinking about a lighting change with the help of a qualified electrician, consider these things;

What is the primary activity in the room; reading, watching television, entertaining, eating, cooking? Do you want the light to be a focal point or statement piece?

Talk with your electrician about what you are looking for in a new lighting scheme. Your electrical contractor can give you some valuable advice about what will work best and what should be avoided. Lighting has come a long way in the last 20 years. You are not longer relegated to the standard fixture in the middle of the room. There is recessed lighting, track lighting, brilliant chandeliers and a variety of unique fixtures. Along with the different styles of fixtures, you also have the option to switch to the energy-saving LEDs, which your electrician can explain in more detail. Give The Electric Connection a call today and schedule your lighting transformation.

Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.