We’re partnering with the Red Cross to collect donations and help save lives, reduce injuries, and cut down on needless losses caused by home fires.

Each year, 12,600 people are injured and 2,500 die as a result of home fires in the United States. Property loss as a result of this is estimated to be at $7.3 billion, making a devastating impact on the wellbeing of families around the US.

By donating you are providing the Red Cross with the resources it needs to provide critical services for people who have been impacted by home fires. They will also provide lifesaving tools, such as smoke detectors, and information to help support efforts for prevention of home fires, allowing families to stay safe and ensure that they are doing everything in their hands to avoid this catastrophe.

Help support us as we help provide families with the help that they need to rebuild their lives.

From the National Fire Protection Association, there were 1235 revisions made since 2014. First of all, code-making panels from the NEC created these revisions which were submitted to the NFPA for consideration. Below, find some of the NEC code changes that were proposed and/or made to electrical safety codes.

This change requires the branding of any reconditioned equipment, Furthermore, descriptive markings, trademarks or name must be displayed. Additionally, it enables the recognition of the responsible organization that carried out the re-branding.

Most noteworthy, with the changes in this code, any electrical equipment would be traceable from its worker or buyer.

Added to cover any electrical equipment located in a cramped place. This includes:

This change was directed at checking the provisions of equipment used in limited spaces. Also, it addresses compliance of crawl spaces and ceiling spaces.

This is a general review of 110.26. For any type of working space, conspicuous and permanent signs should be provided.

The above code changes should be followed by engineers, architects and designers. The new NEC Code Changes were developed to avoid complications or unlawful/unsafe activities in the workplace.

Whether it has to do with a simple home improvement or a more in-depth renovation, a permit for electrical work is required to obtain permission from the governing authority to go forward with the project. Permit pulling—requesting a permit from a governing authority, which could be State, County or City —can be challenging for homeowners who are not familiar with electrical plans. but the process of pulling permits for electrical work is fairly straightforward if you understand and meet all requirements for electrical contractors.

Each city, county and state can have varied building codes, so it is important to use a professional who is versed in navigating this process. Permit pulling requires first submitting an official application that includes a schematic of what electrical work is going to be done. There will be a permit fee involved to cover the application cost, the review and the inspection. Once a plan is approved, a permit will be issued, and work can begin. On-site inspections will be conducted to ensure that all of the work conforms to the permit as well as building codes and plans. Depending upon the size of the project, there may be more than one inspection, usually a rough and final or possibly partials of either. These inspections serve to protect homeowners from faulty or possibly hazardous work. A code official will come by at the project end in order to provide all required documentation. Final approval will only be given once full code compliance is met which could mean NEC, UBC or IBC regulations. If the homeowner is completing the electrical work as a do-it-yourself project, it may take multiple visits from the code official before a final approval is provided, depending upon the skill level of the homeowner.