Everyone is looking for ways to save power.  Whether to save money or the planet, one of the best and most popular ways to save power on lighting is by installing dimmer switches to control your lights.  Besides saving power, they’re also great for setting the mood in your home.  More and more dimmer switches are being installed in American homes every year.

Dimmer switches are easy to install, even for an everyday person. Of course, even an easy installation can be problematic, so you should always contact the best Dallas electrician to ensure that you’re doing things right, or to perform the dimmer switch installation for you if you don’t want to take a chance of making a mistake.  Either way, here are some important do-it-yourself electrical tip to keep in mind about dimmer switches:

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

What questions do you want to ask an electrician? If you are in need of an electrician and you don’t know where to begin, these tips may come in handy. Ask an electrician the right questions so you can quickly narrow down your search.

So what exactly should you ask an electrician you’re thinking about hiring? It might be tempting to rush into a decision and then deal with the consequences, but asking several questions can ensure you make the right choice. Hiring an electrician and then later finding out they aren’t the right fit can be a frustrating — and expensive — experience. Protect yourself by making sure they’re the right hire for the job.

In most states, electricians are required to have valid licenses; don’t take this for granted, however. Make sure the electrician you hire is fully licensed because this ensures they have gone through the necessary training and are equipped to handle the job you’re want them to do.

Another important question to ask is whether or not the electrician is insured. The professional you hire will undoubtedly take steps to keep your property safe, but accidents can happen. Liability insurance can cover damages that may occur during the job, and in turn, can protect you from unnecessary headaches down the line.

It’s important to know about the experience-level of the electrician you’re thinking about hiring. Keep in mind even the most thorough education isn’t much use without the experience to support it. An experienced electrician has seen cases like yours before and knows how to help you avoid unneeded expenses and setbacks that a more inexperienced professional might not notice.