There are plenty of reasons to install new indoor light fixtures in your home. Perhaps you want to update your interior aesthetic, or save energy by upgrading to efficient LED bulbs. Maybe you even want to bring your lighting into a smart home control system. Although wiring a new fixture is usually a simple job, complications can crop up if your home still uses an outdated wiring system. In order to comply with your local building code, you may have to perform some extra electrical work to ensure the safety of your new fixture. Read on to learn more.

Bringing Older Electrical Work Up to Code

If your home still uses knob-and-tube wiring, the law prohibits connecting new light fixtures to the old wiring. You don't have to replace the entire wiring system itself, although that’s not a bad idea, because it can reduce your risk of an electrical fire and lower your insurance rates. Even if you don't have the time or money for such extensive electrical work, though, you can remain in compliance with your local code by installing an electrical box between your wiring and the light fixture.

You can purchase an appropriate electrical box at most local hardware stores – but make sure you verify that it is designed to meet local code guidelines for installing new light fixtures. From there, after you turn off the power to the room, you have to cut a hole in the wall where you want the fixture to go, large enough for the box to fit. If you're lucky, the fixture will be near a stud or part of the frame so you can mount the box easily. Otherwise, you have to cut the wall extremely carefully to ensure you leave enough lath and plaster keys to support the box.

Wiring the New Light into Place

Next, once the box is ready to be installed, follow the manufacturer instructions to clamp in the home wiring to the back of the unit. You may have to add a ground wire as well, depending on the specific scenario. Anchor the box using metal supports, and when it's all in place, connect the light fixture. When everything is securely connected, you can turn the power back on and give your new light a trial run.

Remember, knob-and-tube wiring can be a fire hazard, and performing electrical work in general can be dangerous if you don't know what you're doing. If you have any doubts or questions about installing your new light fixture, the best route is to have a professional electrician give you a hand.

Expert Assistance with Your Electrical Work

For assistance with all your electrical work, including installing new light fixtures, contact a qualified residential electrician today.

Imagine how relaxing it would be to soak away the day’s stresses or invite friends over for a fun party featuring your own hot tub. Having a hot tub or sauna in your backyard or patio area is a dream of many. These provide a lot of fun as well as stress relief and are more affordable than you may think. However, the idea of installing a hot tub is something you may not be ready to tackle yourself. Even if you are looking to save money, you may find that calling a Burbank electrical service, such as The Electric Connection, is actually the best option. Consider the following before you think about installing a hot tub yourself.

Safety

Even if you are a skilled at home improvement projects, installing a hot tub can be a dangerous activity. This is because installing a hot tub combines water and electricity. You do not want to take the risk of injury to yourself or others by making a mistake in the installation. A licensed electrician in Burbank has the background to make certain he or she is not injured and the electrician should have insurance in case there is an issue.

Equipment Care

In addition to your personal safety, you should also keep in mind properly caring for the equipment during the installation process. In many cases, you will void the warranty on a hot tub or sauna if you do not install it properly. So for this reason, search the internet for electrician Burbank and allow a professional to take care of this job for you.

If you are considering the installation of a hot tub, sauna or backyard water feature, find a Burbank electrician by visiting The Electric Connection’s website at ElectricConnection.com  or calling us and talking to a customer service specialist today.

You must have heard how it’s important to unplug your mobile device chargers when they aren’t connected. That’s because these chargers continue to drain electricity. While this is a fact, the truth also is that the amount of power that mobile phones and other similar devices draw, is minuscule compared to the amount of power that larger electrical appliances and equipment in your home or commercial premises use.

The electronics we are referring to are the modern, advanced ones that have standby settings; they significantly escalate your utility bills even when they aren’t being used. These energy guzzlers can easily account for up to 10% of an average-size home’s energy consumption.

As mentioned at the start, mobile phone chargers are a very good example of energy guzzlers as they don’t perform any function when they aren’t charging the phones; and there is absolutely no downside to and ensuring they are unplugged most of the time. One more classic example is the microwave that uses more standby energy compared to a mobile device’s charger; this is because the former powers a digital clock.

But it’s common for people to leave that plugged in, as many people tend to use it to check the time when they are in the kitchen. These types of devices don’t account for sizeable energy wastage; however, video games, computer, flat screen TV and home theatre systems are entirely a different story. These appliances are becoming increasingly sophisticated and use advanced technology and over the years manufacturers have begun focusing more on the amount of time it takes for these machines to start up.

That is how the “standby mode” came into existence. That isn’t an “off” mode; when a device is in the “standby mode” it continues to draw power to keep various components and processes working; this helps “wake them” very quickly once you want to use them again. In most cases, the default standby settings aren’t the most energy-friendly, but you can customize them to suit your requirements. You will be able to find more information in the product manuals that come with these devices; alternatively, you can look in the device’s settings menu for the different power options.

Though these advanced technology electronics can be an energy-drain, the simplest and fail-safe method of preventing this from happening is to pull the plug. The sure-shot way to stop devices from driving up your utility bill is to disconnect them from the devices. If you find this too inconvenient, you can utilize power strips. When you hit the main power button on the power strip, the power gets fully disconnected even when you leave the strip plugged in.

The other way to add to the energy-efficiency of your home is to look for devices with higher energy star ratings when you are purchasing any new appliances and equipment. Check on which devices use less power when they are in standby mode as well. If you have any energy-efficiency concerns about any appliances and installations in your home, call Allround Electricals today.

Many homeowners are DIY enthusiasts and like to tackle various jobs around their home. It’s okay to handle small carpentry tasks, furniture finishing, garden maintenance, indoor and outdoor painting and other repair tasks as a weekend project. It gives you a sense of achievement that you have completed these small jobs on your own. In fact, this can also save you a tidy sum on getting professionals to handle the job for you.

Some people just hone their DIY skills by trying their hand at different projects in their home, while others put in a more concerted effort and take classes to learn more complicated skills required for a particular task. With easy access to the Internet, it’s not uncommon to find many people learning different DIY techniques by watching tutorials online.

However, it’s never a good idea to tackle any electrical repairs on your own. Let’s take a look at why:

Those who have no training and certification to handle electrical jobs aren’t aware of many basic things such as:

These may seem like very simple things, but a novice many not be aware of them. This is exactly why it becomes important to hire the services of a licensed, insured and experienced electrician to handle all the electrical jobs on your commercial or residential property. They will ensure that all the work is carried out legally and safely, without any kind of compromises. This also ensures your home insurance isn’t compromised in any way.

AllRound Electricals is a very reputed and well-established company that handles all types of commercial and residential electrical jobs. On board our team are experienced professionals that fully understand all the technicalities of handling electrical jobs. They wear the appropriate protective clothing and have the right kind of tools to carry out the job in a safe manner.

We handle small and big jobs with the same level of dedication and expertise and always look to provide our customers value for money. Regardless of whether you want to get an electrical fixture installed or need complete rewiring done on your property, we are the professionals to hire. For any information about our services, feel free to call us at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263