The short answer is, yes, you can charge your new electric car overnight and drive out into the world with a full charge in the morning. Both new electric cars, the Nissan Leaf and Chevy Volt, started deliveries in Los Angeles in December 2010. If you’re anxiously awaiting delivery of one of these vehicles, it’s time to consider your charging options.

The all-electric Nissan Leaf can drive about 100 miles before it needs a battery charge. The Chevy Volt can drive about 40 miles, and then it starts burning gasoline. It’s a hybrid. Both come with a complimentary charging cord called a “Level 1 charger.” It plugs into an electrical outlet in your garage or carport and requires only ordinary house current. But a Level 1 charger works slowly and won’t take you from a depleted battery to a full charge overnight. You may still be able to use a Level 1 charger if you have a short commute which would allow you to top off your battery overnight. Here’s more about Level 1 charging.

Drivers who have longish commutes or who don’t charge up every night will want faster charging with a Level 2 charger. A Level 2 charger takes a Nissan Leaf battery from completely empty to completely full in 8 hours; 4 hours for the Volt. So, even if you totally drain your battery, with a Level 2 charger, you’ll be able to fill it by morning. A Level 2 charger is usually purchased along with the car. It’s housed in a container about 18 inches around and hangs on the garage wall, sticking out about a foot. It requires installation of a 240 volt circuit, higher than ordinary house current.

Both Nissan and Chevy will arrange your purchase and installation of a Level 2 charger if you wish. Both car manufacturers have contracted with electrical contractors that they’ve trained and certified. Or you can make your own arrangements with an electrical contractor.

Purchase and installation of a Level 2 charger costs about $2,000. The price can vary quite a bit depending on the distance of the charger from your electrical panel and on whether you need an upgrade of your panel size to accommodate the additional power demands of the charger. Some lucky homeowners, who registered for a California state research project on electric vehicles, will qualify for a discount, or even free purchase and installation. And, here’s some good news: A few days ago, on April 27th, L.A. DWP announced a rebate of $2,000 to homeowners who install a Level 2 charger as part of their research project. A rebate of this size is significant as, in many cases, it can cover the entire cost of the purchase and installation of a charger. Click here for more information on L.A. DWP rebates for EV chargers.

All homeowners who buy an electric car will benefit by their far-sightedness. No more stops for gas. No more worries about gas prices creeping up to $4 or $5 a gallon (or more?!) any time there’s unrest in the Middle East or a natural disaster. They’ll know that they’re contributing to the solution to our dependence on foreign oil — about 60% of that oil is sucked up by our gas tanks. For this reason, President Obama has set the goal of one million electric vehicles on U.S. roads by 2015. For us in Los Angeles, every electric vehicle makes our skies bluer — when you’re running on electricity, your car is emitting no pollution or greenhouse gases at all.

For more about my company, The Electric Connection — all the stuff you wanted to know but were afraid to ask — If you’re interested coupons for electrical work, for example, $50 off installation of a Whole House Surge Protector in the L.A. area, click here on our coupon page.

You may be getting tired of having to unplug this to plug in that or walking around trying to find an extension cord long enough to use your laptop in your favorite chair when it is dead. Everything we do somehow involves electricity and when the electricity isn’t dependable or easily accessed, things can be difficult. For some, the problem is their home was build 30 years or more ago and back then, builders didn’t have to worry about putting six outlets in the kitchen or several outlets in one spot in the living room to accommodate all of today’s gadgets. Today, when you try to run the microwave and coffee maker at the same time, you get a tripped breaker. Your electrician in Beverly Hills can help you with that. You only need to call The Electric Connection.

The reason you can’t use several appliances at the same time is because the way the outlets were wired to the same breaker. The breaker cannot support the electrical demand. When you look at the basic number of outlets in the living room or your bedroom, it is the same story. A Beverly Hills electrician explains each of those outlets and the light fixture in the room tend to be on one breaker. Trying to add more outlets or a powerstrip to create more outlets is going to overload the breaker and it will trip.

Regular tripping breakers weaken overtime and will eventually not work altogether. You can solve all of these problems by having your electric panel upgraded by an electrician. Beverly Hills homeowners will love the freedom more electricity brings. Charging devices, running appliances with the lights on and living life in the 21st century is possible with an upgrade. Give The Electric Connection a call today and schedule your appointment.

A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.