Technology is advancing at a dizzying pace. What used to be the ‘latest’ and ‘most advanced’ devices yesterday becomes redundant today. When people embrace any technology, they do so because it adds convenience, comfort and safety to their lives in one way or the other. When it comes to your home, all these three aspects matter a great deal. It’s why many people are now veering towards the smart home concept.

Sure, many homeowners already have Internet-based security systems and landscape irrigation systems that are connected to timers etc; but smart homes are designed and set up to do much more than that. Having a smart home is a lot about Wi-Fi connectivity and more. Take a look at some concepts; this will help you create a plan for your smart home.

It’s not uncommon for companies that launch smart home products to say that connecting their devices to the Internet is a breeze. Sure, they are bang on spot most of the times, but what actually matters a great deal is the Wi-Fi connectivity in your home. These are some of the things you will have to keep in view while planning your smart home:

This is vital, and it’s something you should keep in view while planning your first smart home. The longer the distance the radio waves have to travel, more the connectivity issues. The best way to overcome this kind of an issue is to install the Wi-Fi router at the center of your property and on the ground floor.

You will find a number of products which claim they are able to extend the Internet connection in your home. The simple fact is that multimedia over coaxial power-line adapters, network extenders etc tend to slow down the signal by around 50% and that reduces the consistency of the network. Of course, you won’t find any issues with driving a motion sensor or a smart bulb; however, you might just find it challenging to stream a movie to your tablet/laptop, only because it can’t figure out which Wi-Fi router it should connect to.

At times, installing a network of Ethernet cables turns out to be the best solution. You can use cable runs to install your smart home hub devices in spots that are more accessible. The devices that are connected to these hubs will function more smoothly if you do this. If your home is already wired for telephones, hardwiring for Ethernet won’t be too difficult. You will need to speak with your electrician and check whether he would be able to run an extra cable to the point you need it at, without too much of drilling and sawing.

When you are planning your smart home, ensure there are sufficient power points at different places in your house. While certain devices may be battery-powered, many aren’t. So whether it’s a Wi-Fi router/extender, web security camera etc, you will need a power point to plug them in. And of course you don’t want power cords dangling all over your smart home.

Very simply put, if you are building a new smart home or remodeling your existing one, sit down and plan not just for the current smart devices you plan to install, but for future ones as well. Map out a detailed plan and get some advice from the installer too. Coming back to the first point – focus on getting a very good Wi-Fi router and ensure its positioned at the right point on your property.

Very importantly, get a professional to do all the wiring work once you have your entire smart home plan in place. For more information about smart home device and hardwiring solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

Kenneth Crawford is a South Florida based interior designer and owner of Kenneth Crawford Interiors.  As the August Designer of the Month, he offers some professional lighting and decorative ideas.

Each element in a well-decorated room from paint color to the detail of each doorknob is important, and the right lighting is key to unlocking the true potential in your design. The space must be orchestrated perfectly, creating a cohesive flow through out.

I have over 20 years of experience with commercial and residential design, and whether you are building a new restaurant or renovating a 500 sq. foot dining room, the lighting fixtures themselves and the angle of illumination make a world of difference. That’s why I shop Capitol Lighting’s extensive database to find everything I need from unique ceiling pendants and elegant crystal chandeliers to simple bath vanity fixtures and top quality light bulbs.

The examples featured below show how the right lighting will create a custom finish and bring out the best in your decorative scheme:

Dining Room

When designing an interior space, you must look at the room as a whole. Light fixtures should blend harmoniously with the decor, adding color, texture and style to complete the design. The Philippe Stark fixture, purchased from Capitol Lighting, is more like a sculpture, making a stunning design statement and blending with the architecture without obstructing the view or overpowering the space.

Guest Bedroom

These nightstand lamps purchased from Capitol Lighting add the perfect finishing touch to this room. I wanted a metallic element to pull the silver embedded in the artwork and create a sparkling effect reminiscent of the Intercoastal on a clear day. 

Powder Bathroom

The Italian glass sconces were selected for their linear design, which adds to the architectural composition of the room.

Bedroom

We’ve recently added a new explosion-proof light for use in granaries, paint booths, mills, mines, oil refineries, auto shops, marine vessels, shipyards, and other hazardous locations.

This LED light is listed as UL1598 for wet locations and UL1598A for outdoor marine applications. It is classified as UL844 and meets National Electric Code—NFPA 70, article 500—requirements in the U.S. for Class 1 Division 1 (groups C and D), Class 1 Division 2 (groups A, B, C, and D), and Class 2 Division 2 (groups F and G) hazardous locations. The light fixture meets IECEx Zone 1, 2, 21, and 22 requirements for safe operation around combustible gas and dust.

Designed to replace 320-watt metal-halide (MH) fixtures with comparable output—the 100-watt LED explosion-proof light emits 13,000 lumens of natural white illumination. This weatherproof LED fixture operates within a 100-277V AC range and is built to last five times longer than MH lights.

The durably constructed light has a vibration-resistant anodized aluminum housing that prevents the release of sparks from internal components. The die cast housing is also powder coated for corrosion resistance and has a removable back plate for access to the constant-current driver, which is sealed with a silicone gasket. LEDs are protected by a tempered glass lens.

A conduit is required for installation, and the fixture has two openings for input and output connections. The LED explosion-proof light can be pole mounted or mounted to a wall, floor, or ceiling with its included bracket. A five-year warranty protects against any manufacturer defects or malfunctions.

If you’re like us, you are proud of the artwork you’ve chosen to adorn the walls of your home or business. A framed movie poster, an original oil painting, or even a stylish wall hanging all serve to bring color, and life to a room. Make sure that the images that have been so carefully selected are seen in their full splendor with the right lighting.