High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

Whether you love the winter season or you aren’t a fan, there’s one thing that can’t be denied—winter is downright expensive. With your heating system roaring, the holidays coming up, and longer nights, you can find yourself neck deep in utility costs in a real hurry. Looking for easy, effective ways to reduce your energy costs this season? If so, the experts at Hoffman Electrical have you covered!

Our certified electricians have been proudly serving Tampa and the surrounding areas for decades. When it comes to quality service and products, we’re just hard to beat! And above all else, our experts are here to help. Sometimes that means electrical repair and installation, and sometimes that means just some good old fashioned useful tips.

For many people the basement is a place of escape and for others it is simply a place for storage. With all the room underneath you, you don’t want it to go to waste. Renovating your basement can greatly increase the value of your home if it is unfinished or in need of an update. One important point to remember is the electrical wiring hiding behind the walls.

If you bought your home and it was already finished, that work could have been done many years ago and you might be thinking it is time to update fixtures, paint, and maybe evening moving a wall. When you begin pulling things apart, be careful for loose or old wires. If the electrical work was not done right, there could be loose electrical wires that were not tied in properly.  The wiring can also be old and out of date. If you are moving walls or replacing fixtures and you are worried about the age of the wiring, have a licenced electrician come to inspect your wiring. If you are going to go through the effort of redoing your basement you want to make sure it is done right.

For those who have an unfinished basement you have a clean slate to work from. Once you start putting up the framing for rooms, you can start on the electrical rough in. This is the foundation for the electrical wires, which includes drilling holes in the framing and running the wires to where they need to go. If this is not done correctly it could leave you with a significant headache once your drywall is up and you have to punch a hole in the brand new wall.

When you are planning out your new layout, make not of where each outlet, light switch, and light fixture will be placed. This will help you plan out the electrical rough-in. If you have reached this point in your basement renovation and don’t know where to go from there – contact Expert Electric. Our electricians can help you with the planning and running the wires through your basement.

Most electrical panels are located in the basement. Prior to your renovation, you probably could easily access the panel. When you are putting up framing and drywall, be sure to leave enough room around the panel for it to easily open. You also want to make sure not to cover it with furniture that could prevent you from accessing it quickly. In the event that you need to turn on a tripped breaker or even turn off a circuit in an emergency, you don’t want to be struggling with furniture to get the panel open.

Before you renovate your basement, have a plan and be prepared.

What is a spotlight? What is a floodlight? Knowing the difference between the two is important for properly lighting any application. Before you can understand the difference, you must know what a beam pattern is. Beam angle or pattern is a measurement of the angles that are formed between a cone of light’s brightest point (the center) and the points on both sides of the center where the light’s intensity is 50 percent as bright.

PAR30 bulb that is available with a spot or flood beam pattern.

Fixtures, such as retrofit LED can lights may also look similar to one another while functioning as either spotlights or floodlights. Some light bars are even capable of emitting flood, spot, or combination beams. There are, however, certain fixtures that we imagine when we think of floodlights and spotlights.