High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

 

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

 

 

 

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

 

 

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

Becoming a licensed Colorado electrical contractor is not easy, and that’s the way it should be. Electrical systems—whether they are in a home or a large industrial facility—are both vital and potentially dangerous. Electricians need to be trained and skilled to ensure that these systems are installed correctly, functioning properly, and safely maintained; otherwise, serious problems may occur, which could lead to lost productivity or property. There are many companies who advertise electrical contracting services, but you don’t want your safety to be left in the hands of an amateur.

The Certification Process

There are three levels of licensure for electricians in the state of Colorado: residential wireman, journeyman electrician, and master electrician. Each level requires testing and many hours of verified on-the-job experience. In fact, the amount of time electricians must put in to be licensed may surprise you: *

PECI Goes Even Further

You Can Trust PECI

*from the Colorado Department of Regulatory Agencies

 

 

Using a warm white or RGB COB (chips-on-board) LED, these flood lights emit up to 1,000 lumens of illumination in a wide 120-degree beam pattern. The weatherproof LED fixtures have a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket is also included to direct illumination where it’s needed.

One of the best opportunities to save money is to convert Metal Halide and High Pressure Sodium High Mast lights over to LED. A typical high mast light consists of a tall pole, 50-150 tall and contains multiple fixtures attached to the pole, typically 4 to 12. The lower poles may be equipped with 400W Metal Halide or High Pressure Sodium bulbs, the taller poles typically are installed with 1000W Metal Halide or High Pressure Sodium bulbs.