Among the more obvious pieces of electrical safety advice you may have encountered is to never saw the third prong off of an electrical plug in order to fit it into a two-prong outlet. But just because we can recognize that as a self-evidently bad idea doesn’t mean everyone knows why it’s dangerous.

Two-prong outlets have only two wires: a hot wire and a neutral wire. But a three-prong outlet also has a ground wire, which is a safe place for unexpected bursts of current to go when they occur. Without that connection between the ground wire and the plug, wild current can go anywhere: into your electrical device, where sensitive components can be destroyed, or worse, into your body. Shock and electrocution are more likely to occur when no ground wire is present.

Moving On Up

Three-prong outlets didn’t become standard in North American homes until the late 1960s, so while modern homes should be in good shape, there are plenty of homes out there with old two-prong outlets.

As a quick fix, you might be tempted to use adapters that convert two-prong outlets to fit three-prong plugs. You should resist the urge to use these so-called “cheater plugs”, however -- the ground wire is there for safety, and simply bypassing it creates a potentially serious hazard.

Instead, you should seriously consider upgrading the outlet if you need to regularly use three-prong plugs in that area. If you live in an older home where most of the outlets are two-prong, this is an upgrade you’ll need to do sooner or later.

When it comes to upgrading two-prong outlets, there are two basic options. The best choice is to have ground wires installed so that the outlets are fully up to the current standard. Unfortunately, this can involve several hours of electrical service and may require some cutting into walls, depending on how many outlets are being upgraded and how the home is configured. It may be a big undertaking, but it’s a quality investment in your home and safety.

A cheaper alternative is to upgrade to a ground fault circuit interrupter outlet, or GFCI. These outlets are capable of shutting themselves off if an electrical shock risk is present, but they won’t protect sensitive electronics from surge damage. The trade-off is that there’s no need to run a ground wire.

Out With the Old, In With the Old?

If you don’t like either of these options but you’re having trouble with a two-prong outlet, it’s technically not a violation of code to replace the outlet with another two-prong version. Just keep in mind that this arrangement leaves both people and electronics vulnerable, so use these outlets with care and consider making a plan to upgrade later.

Ready to upgrade those old outlets? Start the process today by scheduling a no-obligation consultation with your licensed, local electricians.

Get him two Battery operated LED Picture Light.

source) Make sure your BBQ Master has enough light to control the flow of wickedness with the Black Mo Tools Axe by Brook & Hunter and a Power Box 360 stereo by Bosch is a dust and moisture resistant powerhouse with a rubber cage exterior. Rock the night away with a LED Headlamp for smaller, intricate ones that need direct light.

You know the kind — he has the biggest TV you’ve ever seen and has an entire room devoted to it. Upgrade the man cave with his favorite LED Fiber Optic Star Ceiling Kit.

This is the second blog post in this year’s 15 smart gift ideas for students of any age. Visit our Holiday Specials!

Many homeowners carry out electrical upgrades in their home and they get the fixtures and fittings replaced. At times, switchboards etc. may be replaced or circuit breakers too. However there is one component of electrical installations that is typically out of sight, out of mind – wiring!

We at Allround Electrical always recommend to our clients that if their home and the wiring in it, is over two decades old, they should consider getting wiring upgrades done on their property. In fact, when you choose to upgrade the wiring in your home, it gives you the assurance that the system will be able to bear the load of all the electrical appliances that you add to the different circuits on your property.

It’s a good idea to plan wiring upgrades at the same time that you plan remodeling projects; this is when you might open up walls and ceilings anyways; and this reduces the hassle, expense and time spent on getting this work done. This is because most of the electrical wiring is fitted within your walls; and it often involves opening up various wall sections, that will later have to be patched & repainted.

This is why it’s important that you plan for current and future requirements; this will ensure that you don’t have to worry about the wiring upgrades for at least a few more years. So, what is it that makes wiring such an important aspect of the electrical installation on your premises? Wiring supports a range of critical functions including:

When you are getting any of these jobs done, it’s crucial that you hire the services of an expert and experienced electrical company for the job. They will ensure that high grade, appropriate materials are used in the work and that the workmanship is of the highest grade too. While you are getting this job done, there are certain things you should be doing, such as:

These are just some of the basic aspects that have to be attended to when electrical upgrades are being done in your home. When you hire the services of a vetted and credible electrical contractor, you have peace of mind that the job will be handled in the best possible way.

For more information, simply speak with the experts at Allround Electrical and take our advice on various aspects of electrical and wiring installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Find the best in outdoor lighting, as well as fabulous light fixtures for the kitchen and bath.  Visit a Capitol Lighting showroom to view outstanding arrivals to welcome the new season.

From kitchen island light fixtures to mini-chandelier lighting, there is something for everyone with stupendous seasonal savings on Artcraft Lighting…

Enriching the Kitchen with lighted pot racks that are functional, beautifying and surprisingly affordable.  Don’t miss Artcraft’s  “Contessa” collection!

Reach for the Stars and add a little contemporary flair with new collections including Artcraft’s “Eclipse,” “Aquarius,” Aurora,” “Rocket,” and “Shuttle” series.

Enjoy Time-honored Design and traditional elegance with Artcraft’s “Heritage” collection featuring outdoor lighting superbly finished in dark oil rubbed bronze.

Treat Yourself to a Little Romance with the latest mini-chandelier lighting fixtures perfect for powder rooms, bedrooms or small foyer areas.  Especially attractive additions include the “New Castle” collection from Artcraft.

Meet the Latest Technological Turn Ons with Artcraft’s LED “Radiance” collection of Energy Smart bath vanity lights. Also brilliant are Energy Star ceiling fixtures in Artcraft’s “San Diego” collection and Energy Smart chandeliers and island light fixtures featured in the “Berkeley” collection.

Artcraft has set the standard for quality lighting featuring hand applied finishes and distinguished glassware for nearly fifty years. The chandeliers are breathtaking and styles are available in a range of sizes, including mini-chandeliers and pendant lamps, to accommodate home decorating schemes from cozy corners to master bedroom suites.

Whether you need to update the light fixtures in your kitchen with new island light fixtures or brighten a gloomy nook with mini-chandeliers, you will always find a complete selection of home lighting and accessories at Capitol Lighting.

Revere the Dark Sky and Welcome the Fall Season with Wisdom and Light

Fun Fact: Certain municipalities throughout the United States have passed laws and ordinances requiring outdoor lighting fixtures on newly constructed homes be “Dark Sky” compliant. These ordinances are intended to protect our view of the nighttime sky from being obscured by “light pollution” inherent in poor artificial lighting design.

Light emitted from Dark Sky compliant fixtures is shielded to purposely focus illumination in a downward direction over designated areas where it is needed. Dark Sky compliant lighting also leads to energy savings. Whereas an outdoor sconce with openings on the top and the bottom may call for a 100-watt bulb, you may switch to a 40-watt bulb in a Dark Sky fixture that emits light only from the bottom for similar lighting effects.

Visit a Capitol Lighting showroom for more information on the latest outdoor lighting applications.  Enjoy promotional discounts on innovative designs from Artcraft Lighting.

Not to be missed-Artcraft’s stately outdoor post lamps in the “Aspen,” ”Denver,” and “Seattle” collections.  Your home will stand out with class and style, while respectfully illuminating your environment for safety and security.

For great value and top quality designs in outdoor lighting, you can count on Artcraft. Capitol Lighting is proud to showcase outstanding new designs from Artcraft Lighting.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs: