Doing it yourself can be a fun, satisfying experience, but if you don’t know what you are doing and you are dealing with potentially dangerous things, like electricity, it is best to leave it to the professionals. There are far too many things that can go wrong when you try and fix something that has anything to do with your home’s electrical. It is best to call an experienced electrician like those at The Electric Connection.

Taking care of odd jobs around the house is normal. It is a part of home ownership. However, what many people fail to realize is that some jobs are way more complicated than they believed in the beginning. In fact, those jobs are not only more complicated, they may actually be hazardous to anybody who isn’t trained.

The following reasons are why you should always leave any electrical repair work to a certified electrician.

*You could be putting yourself at risk of electric shock that can be fatal. Fooling around with the wiring in your home is dangerous. One wrong move can have serious consequences. *Property damage in general is another very real possibility. You may not burn your house down, but you could cause damage that has to be repaired by a professional.

The next time you need a little work done around the house, think twice about grabbing your toolbox. If you need any kind of electrical repair work done, give The Electric Connection a call and leave it in their very capable hands.

— Electric Connection (@LAElectricianCA) December 14, 2015

In many parts of the country, like Los Angeles where I do electrical work, electric vehicles (EVs) are being delivered to anxiously waiting customers. Deliveries are also starting in other West Coast cities as well as cities along the Eastern Seaboard. In the center of the country, not so much. In many cases, these areas will start receiving deliveries towards the end of 2011.

Let’s say electric car deliveries have already started in your area and you own of these new-fangled vehicles — a Nissan Leaf or Chevy Volt. How do you recharge the battery? In my last post, I talked about the simple and inexpensive option, Level 1 charging. This is using a charging cord that comes as standard equipment with your electric vehicle, similar to the one your cell phone comes with. You’ll need an electrician to make sure that you’ve got the right kind of outlet in your garage or carport (GFI outlet on a dedicated circuit). Your electrician will also need to check whether your electrical panel needs upgrading for sufficient capacity. Once it’s a go, plug your charging cord into the outlet and wait … a long time. For the Chevy Volt, 10 hours, and the Nissan Leaf, 20 hours — empty to full.

Even though Level 1 charging is slow, drivers who have short commutes may be satisfied with it because, if they work it right, they won’t start at empty. They’ll have charge left in their batteries and will simply top off at night.

Here’s how it can work. The range of the Nissan Leaf is about 100 miles. Americans drive an average of 33 miles a day. Drivers who drive the average 33 miles will use only one-third of the battery in a day. If they religiously plug in when arriving home, they will be able to top off at night in about seven hours and leave with a full charge in the morning.

In addition, the pressure to be fully charged when leaving home will ease as chargers are increasingly installed in public places. Chargers are already available in Los Angeles train stations, the main airport (L.A.X.), the L.A. Convention Center, and other public places. One can easily find the network of existing public chargers on-line. In addition, malls will begin installing chargers as an inducement for shoppers and workplaces as an employment benefit. In time, you’ll be able to recharge your battery while you shop or work. But we’re not there yet.

For hybrids, like the Chevy Volt, the issue of leaving home fully charged is less pressing. The Chevy Volt can drive for about 35 miles on a fully-charged battery. Once the battery hits empty, it, like other hybrids, the Volt turns to burning gas in a conventional internal combustion engine. This isn’t good for gas usage, but on the other hand, the driver may suffer less from “range anxiety.”

While you may be able to make Level 1 charging work, you also have the option of faster charging by installing a special Level 2 charger in your garage or carport. More on Level 2 Charging in later posts or find out more by clicking here.

For more about my company, The Electric Connection — all the stuff you wanted to know but were afraid to ask — . If you’re interested coupons for electrical work, for example, $50 off installation of a Whole House Surge Protector in the L.A. area, click on our coupon page.

By: Jason Lee

It’s that time of year again. Everyone is making resolutions, turning over a new leaf, and looking to make this year better than the last. Make this year great by making sure the leaf you’re turning over is green and consider solar power and the benefits it could bring to your home and/or business. 

Solar power is a popular form of renewable energy that helps keep the planet clean. Oil, gas, and coal will produce energy, but require manpower to refine it into a usable form. With solar power, as long the sun is around, you have power. Solar power can be used for many things around the home or office, including generating heat and electricity and it’s great for indoor and outdoor lighting. In fact, the installation of solar powered outdoor pathway lights is one of the easiest ways to use solar energy in your home or business. One of the best uses of solar power is heating water. Homes that have hot tubs or swimming pools should consider looking into heating them with the help of solar power. Due to low operating costs of the solar power, it is very cost effective.

Benefits to solar power include the slowing of global warming, saving homeowners money, energy reliability, and energy security. According to the U.S. Department of Housing and Urban Development, home values rise an average of $20 for every one dollar of reduction in the annual utility bill. Another great thing about going green this year is that it will continue for years to come. By switching to solar power, homeowners may be eligible for tax credits, rebates or other incentives, and you will be reducing the amount of environmental impact you have on the planet.

So start the new-year off right by looking to make this year and the years to come a brighter and cleaner place not just by turning over a new leaf, but by making sure that leaf you turn over is green.

Source:

Source:

Source:

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.