As energy costs continue to climb, and many people become more concern with their overall impact on the environment, solar power has become a serious consideration for more homeowners than ever before. When choosing to have solar installers install solar panels on your home, one of the first things that you need to do is get a good estimate of your home’s average energy usage. You can then work closely with your installer to determine the size of solar power system that works best for your home.

Gather Your InformationThe easiest way to get an estimate for your home’s average energy consumption is to gather your electric bills for the last year. You can then add all of the kilowatt-hours (kWh) that you used each month and divide this number by 12. This will give you the average number of kWh that you used each month. You can then divide this number by 30 to get a daily usage estimate. Because the average number of peak sun hours in the United States is 5 hours, you can divide this daily estimate by 5 to get an idea of how much electricity your system will need to generate each day during these peak sun hours.

Naturally, the number that you arrive to by this process is only an estimate. The cost of solar panels depends largely on the size of the system that you install. The estimate that you create will give you and your solar installers a good place to start when it comes to determining the size of your solar power system. If you are looking for more information about solar panels, the installation process, purchase and finance options, take a look at the rest of the information that we have available here at Solar Panel Info.

A safety switch is essentially a device that very quickly switches-off the electricity in case any electrical fault is detected. In effect, it reduces the risk of injury & death caused by contact with electricity. Current day safety switches are very different from the ones used even up until a decade ago. Today, it’s mandatory to have these installed in buildings where any kind of electrical addition or upgrade has taken place.

Apart from this, safety switches are also needed for power outlets that that supply electricity to mobile homes like caravans etc. It’s not mandatory to have these safety switches in older homes; however, the recommendation is that you should consider getting them installed. It is one of the most effective ways to protect your family & yourself from electric shock.

ELCBs or Earth-leakage circuit breakers are safety devices used to prevent shock in electrical fixtures which have high Earth impedance. The current installations use the circuit breakers that directly detect leakage in current. Here are some features of an ELCB:

RCDs or RCCBs are essentially modern electrical wiring devices which quickly disconnect a circuit if they detect that there is an imbalance in the current between the energized conductor/s & the return conductor. They are designed to immediately switch-off the electricity supply when the electricity leaking to earth is detected to be at harmful levels. These devices offer very high levels of protection from electric shock.

Voltage Earth-leakage circuit breakers were first introduced around 60 years ago, while the current ELCBs were launched only around 40 years ago. For a very long time, voltage-operated ELCBs & differential current-operated ELCBs were both called ELCBs; this was because it was a far easier term to remember. However, as expected, this common name caused a significant amount of confusion within the electrical industry.

If someone accidently used the wrong one in a particular application, the installations may not get the kind of protection it needed. It was to eliminate this confusion that the International Electrotechnical Commission decided that the differential current-operated ELCBs will be termed as RCD (residual current devices). Any current that’s over & above the load current is referred to as the residual current.

ELCBs have a number of disadvantages such as:

Today the RCD is preferred means of providing effective shock protection. The term is also most widely used across the globe.

For more information about RCDs and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

As we transition into Fall and Winter, there will be plenty of new outdoor activities for everyone to enjoy. It is important to remember that, there will also be new challenges associated with outdoor electrical safety. The piling of up leaves and falling of snow can create unpredictable electrical hazards around the home. Keeping safe while outdoors doesn’t have to be complicated. Practice proper electrical safety by following these 4 Expert Electric outdoor electrical safety tips:

It’s always a good idea to semi-annually audit your home’s outdoor electrical equipment, especially in between Winter and Spring and then again in Summer and Fall. This ensures that your home is fully prepared to take on any electrical hazards that could occur during severe weather and temperature fluctuations. A licensed electrician can can easily complete this audit for you; however, it’s also possible to undertake this task on your own if preferable. During this audit, ensure that all outdoor electrical equipment is not only functioning properly also stored properly.

Loose or damaged electrical wiring can pose a serious electrical threat to your home, especially if it comes into contact with snow or leaves. A thorough inspection of all wiring and electrical cords should be completed and followed up with a replacement if necessary.

Melting snow can often result in large amounts of water pooling on the ground. If this water comes into contact with electrical equipment and wiring, the equipment and entire home can be at risk. It’s best to plan ahead and ensure that all electrical equipment, wiring and cords are placed and stored so that they won’t come into contact with water sources.

When in doubt, it’s best to contact your local licensed electrician to ensure that your home or building is safe from outdoor electrical dangers. The team at Expert Electric can inspect all of your outdoor electrical equipment and appliances such as hot tubs and pools, ensuring that all of the necessary outdoor electrical safety requirements are met.

Have any questions about outdoor electrical safety or and of our electrical services? Please fill out one of the forms on our website. We are happy to answer any questions you may have. The Expert Electric team of licensed electricians is here to ensure all of your outdoor projects are handled safely. Call us today at 604-681-8338.

Fresh off his Jamaican cruise, Kevin is part of our new construction team.  On Kevin’s off time he enjoys skydiving, skiing, playing paintball and is an avid outdoorsman.  Kevin has competed in the national craft championship and has also began teaching night electrical classes at Associated Builders and Contractors of Iowa or ABC.

Kevin is an excellent electrician and proficient at rough in and final trim wiring.  Kevin has a keen eye for details and always does his best to make sure the job gets completed to perfection.  He takes pride in his work and always does his hardest to make customers happy.  Thank you Kevin!  Thank you for being a critical part of Custom Electrical Services!

Categories: Team Member Spotlight« #1 Rated Urbandale Electrician! Voted Best Electrician.  |  Holiday Lighting Safety Tips! »