The march of consumer product efficiency continues. Modems, routers and other internet equipment are the latest items to get a bump in energy efficiency thanks to a voluntary agreement between manufacturers and trade associations. The standards mean that new equipment should use about 10 to 20 percent less electricity than the gear currently on the market. The bottom line – reduced energy bills for consumers.

Homes Across the Country

The change is ultimately expected to affect 80 million homes in the United States. Currently, the terms run through 2017 and require manufacturers and providers to make their efficiency data available publicly – ask an electrician if you need help interpreting the data or picking out the best model once the new equipment hits the shelves.

“DOE appreciates industry’s voluntary commitment to improving the energy efficiency of small network equipment, and looks forward to the progress they can make and verification of the impacts at the appropriate time,” Dr. Kathleen Hogan, deputy assistant secretary for energy efficiency, U.S. Department of Energy, said in a press release. 

Preparing for the Internet of Things

The voluntary agreement was hammered out among the Consumer Electronics Association, the National Cable & Telecommunications Association and the companies that make the equipment. This efficiency upgrade comes at a crucial time – not only are modems and routers essential for internet access, they will only become more important as smart technology advances and more of your household systems are hooked up to the internet.

“This agreement will begin saving consumers energy and money – and do so long before any mandatory regulatory standards could take effect – while protecting innovation and competition,” Gary Shapiro, president and CEO of the Consumer Electronics Association, said in a press release. “By setting requirements for energy-efficient broadband equipment now, the agreement will lock-in efficiencies at the dawn of the Internet of Things, which depends on strong broadband networking.”

Following the Cable Box Lead

This agreement is similar to a voluntary deal worked out by manufacturers of cable set-top boxes, in which the companies worked with the U.S. government to set an attainable benchmark. The deals are voluntary out of practicality, because federal regulations can take years to take effect and can be quickly rendered obsolete by ever-advancing technology.

“Our industry has proven that voluntary, energy-conservation agreements are the best means of effectively improving energy efficiency, while recognizing the lightning-fast pace of tech innovation,” Shapiro said.

Similar to the set-top boxes, modems and internet equipment are nearly ubiquitous in U.S. households, and they draw power nearly all the time unless the family pulls the plug at night. That means there's a lot of room for cutting back on their electricity usage. If you aren't sure whether the energy savings are worth upgrading your modem or router, ask an electrician to help calculate your consumption and offer strategies on how to get the best return on your conservation investment.

Have you ever wondered what would actually change if you switched to LED? You are probably too accustomed to the CFLs or tungsten lights you use right now, never done a long-term cost analysis and do not really imagine what kind of changes switching to LEDs will bring.

Let`s do a general cost analysis and compare the results of LEDs, CFLs and tungsten bulbs. I will take an electricity cost of 10 cents/KW and an average of 4 hours of light on per day, which means about 15000 hours of operating hours in ten years.

Let`s take the common tungsten lights first. If you have 10 incandescent bulbs in your small office, you will spend about $7.50 to purchase them and have an annual operating cost of approximately $84. Take into consideration that incandescent bulbs will be around for only 1000 hours (500 hours if you are lucky). There is also the additional cost generated by the fact that the air-conditioners will work harder to compensate for the heat emitted by the bulbs. Let`s see what happens in 10 years. In ten years, you will need to replace the light bulbs each year so in total you will spend $75 on the purchase and $840 on the bill, so $915 in total plus maintenance costs.

If you have 10 CFL`s in your small office you will spend about $110 to purchase them and have an annual operating cost of approximately $23. CFL`s will last for almost 10000 hours but they contain mercury and that could be a problem if you have people working for you and a hazard for the environment. If it is very cold or the lights are placed outside in the cold, they will need a couple of minutes to turn on and in some cases, they might not even work. Let`s see what happens in 10 years. In ten years, you will need to replace the light bulbs once and in total, you will spend $220 on the purchase and $230 on the bill so $450 in total plus considerable maintenance costs.

Now let`s see what happens if you have LED instead of CFL or Tungsten bulbs. If you have 10 LEDs in your small office you will spend about $390 to purchase them and have an annual operating cost of approximately $80. LEDs last will last for at least 50000 hours in any environment, whether is cold or warm, whether they suffer physical shocks or vibrations. Let`s see what happens in 10 years. In ten years you will not need to replace the LEDs and in total  you will spend $390 on the purchase and $80 on the bill, so $470 in total, but you will have no maintenance cost.

As you can see, it seems that incandescent bulbs are no option as they are the most expensive ones on the long term.

The first impression is that CFLs might be a little bit better than LEDs as the overall cost is a little bit lower (not counting maintenance costs).  The thing is that CFL will need another two or three replacements in the next years, while the LEDs will work just fine. In addition the maintenance cost will rise with the CFLs. CFLs are also a bio-hazard, they do not work always, take up a lot of space and give an unnatural light, so there are quite numerous advantages to LEDs when we compare them to CFLs so the slight disadvantage of LEDs in the first years can be easily ignored. Moreover, in 12 or 15 years the LEDs will prove to be more economical than all the other options.

By Blake Daniel, Franchisee of Mr. Electric of West Fort Worth

Whether it’s due to thunderstorms in the spring, ice storms in the winter, or blazing heat and power distribution regulation in the summer, the electricity supplied to your home can be unstable at times. This makes your home vulnerable to power surges.

Preventing power surge damage has traditionally been left to the consumer to guess what to do. Do you buy numerous surge protectors and power strips? Do you spend time running around the house during a lightning storm unplugging everything in sight, while putting yourself at risk for electrical shock? Or, do you rely on your homeowner’s insurance policy to cover any power surge losses that may occur?

Now there is no need to worry, you can protect your investments by preventing power surge damage with a Whole House Panel Surge Protector, the heart of industrial protection for your home. There are features not seen in the marketplace until now, creating a main zone of protection and acts as your first line of defense while stopping power surges before they can enter the house through the transmission lines.

As the main line of defense, a Whole House Panel Surge Protector prevents high-energy power surges from ever entering into your home and protects your electrical panel, motor-driven, and other AC-powered appliances in your home against power surge damage.

While this is not a one-unit, full coverage surge protector, as there are many ways in which you can receive a surge, you can be confident that your electrical panel and most electrical items in your house are covered. If you would like more information on how to protect your house from power surges, ask your local Mr. Electric service professional.

Routine electrical service and maintenance is critical for all home or commercial buildings in the Des Moines Iowa area.   When you have routine electrical service done, it will keep your important electrical systems running longer and help you avoid expensive future repairs. In the event that there is an issue with your electrical system, your electrician can identify it during this routine visit so that repairs can be done before the problem becomes larger or even becomes an electrical fire.  Schedule your local electrician today and have your electrical system checked out.