Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

Picture this scenario: you’re sitting at home with your family watching television and enjoying an otherwise run-of-the-mill evening. Then, all of a sudden, *poof*! Your power goes out, leaving you in the dark.

Here’s a quick question: do you know what to do when this happens?

Have a look at our guide to understand your best course of action after an outage. That way, you can keep you and your family safe no matter the situation.

When the power first goes out, take the following steps:

This is a non-issue if there’s a power interruption. But in cases of extreme weather or other emergencies, guarantee the bodily safety of you and your family first.

If you have telephone or cellular service, a quick call to the power company can give you information on the cause, extent and estimated restoration time for an outage.

Depending on the expected outage time, you may want to put a plan in action for your food/water. If the outage is less than two hours, food in your refrigerator and freezer will be fine. After that, however, temperatures may rise high enough to cause food-borne illness. To minimize the risk, avoid opening and closing the refrigerator as much as possible.

In most power outages, municipal water should remain unaffected. However, extreme weather or extended outages could compromise water safety. In cases like this, it’s recommended to avoid using it for anything that could come in contact with your mouth or body:

If possible, use boiled or bottled water to avoid the risk of getting sick.

If an outage knocks out air conditioning during hot weather, your risk of heat stroke will increase significantly. It’s important to identify the signs of heat stroke and address it as soon as it happens. Symptoms include hot/red skin, dizziness or nausea, headaches, rapid heartbeat and a high body temperature.

To reduce the risk of heat stroke, follow these guidelines:

Just like the heat, a prolonged power outage in the cold can quickly create an emergency situation. This holds especially true with most in-home heating systems that rely on electricity in some capacity.

Remaining warm is especially important in these situations. One of the largest risks with prolonged exposure to cold is hypothermia. Signs of hypothermia risk include cold skin, shivering and a body temperature below 95 degrees Fahrenheit. Without proper steps in place, hypothermia can quickly escalate into a life-threatening situation.

Maintaining a warm environment is the most important step in a cold temperature power outage. Use all the following tips to keep your family safe in the cold:

Anytime you call on contractors to perform work for you, you want to make sure you are choosing a company that is delivering the best service on the market and is improving your home or business. That is true for hiring solar installers as well. When you hire solar installers, screen potential companies for the following traits:

You can expect the Electric Connection to satisfy all these conditions. We’re the leading solar installers in the Los Angeles area and are ready to set you up with a solar system that saves energy and money while we redefine your notions of exemplary contractors. Call us to start on the road to energy savings!

The energy consumed by a single building or business can prove to be a huge overhead cost, especially for those buildings of a much larger size.

Starting the initiative to reduce energy consumption is becoming more and more common as the benefits become more and more clear. The benefits of reducing energy consumption is often times for one major reason, and that is to reduce overhead costs. By making switches (such as those listed here), you could realize a 50% or more reduction in overall energy usage in your facility.

Sound interesting? Learn how you can do that with the tips below…

Whatever lighting technology you have right now, if it isn’t LED, then you are probably consuming more energy than you have to be when it comes to your lighting system.

By converting to LED from a technology like fluorescent, you will easily realize a 30% reduction (on average) in energy consumption from your lights. Now, if you have lights such as metal halide or HPS (often used outside or in high ceiling lights), then you could realize even greater savings (by up to 75%)! This, in and of itself, can prove to be a major way to reduce energy usage in your buildings.

facility manager is, but it’s just a fact. Think, who knows more; someone who works with all the equipment everyday or someone who overlooks said worker? Probably the former, and that’s okay! But, just remember to ask them to be on the lookout for things and get them on-board with your efforts to reducing energy in your building. It will help a lot with your efforts!

Planting save energy in your building, but they are definitely the huge players that eat up a lot of energy. By changing just these 9 things, you will be able to put your efforts to the highest reward type initiatives.

Once you’ve switched these major energy consumers, you can then work on smaller areas of your building that are inefficient, just not as much as these 9 things.

What is one thing not listed here that you find to be a huge energy consumer? Comment it down below so we are all aware of it!