Almost every home has Wi-Fi connectivity nowadays; and with so many devices using the Internet, it is more of a necessity rather than an exception. However, it’s also very common for people to find that they don’t really get reliable data speeds in every room or area of their homes and that can be a little frustrating. This is especially true if you have a home office and need to get some work done at a particular pace.

This is why you need to have the right kind of data cabling installed in your home. We know what it takes to install excellent data cable systems; and these add to the reliability and performance of your wireless network. This is because hardwiring is always more reliable than Wi-Fi connectivity as there are chances of interference in the latter; and this reduces the quality of the Internet speeds and connectivity.

However, there are times when data cabling might not work in every type of building layout and it’s when we may work on providing solutions that help extend your wireless network as well. Regardless of the kind of solutions you require and the size and complexity of the installation, we can handle the job for you in the best possible way. Once you have a good wired network, you will find that you have high speed Internet access for IP security cameras, online gaming as well as file sharing and media streaming etc.

When you hire professionals to handle data cabling for you, it’s important to look for a company that will provide you with comprehensive solutions such as installation, repairs and maintenance too. You only have to tell them where you need the Internet connections and they will design a plan for data cable installation that extends to all these places. The different data point and cabling services include:

It is necessary that you hire registered cablers for all data cabling jobs. We at Allround Electricals have expert and experienced data cablers on our team and you have the assurance that all the work is being carried out by qualified specialists to the highest quality standards. We are the data cablers that handle it all – ranging from phone sockets and Internet sockets, Video distribution and LAN sockets; we can tackle every job with the highest levels of expertise.

Every job we handle is compliant with the existing telecommunications and safety regulations. We understand that there will be times when you don’t want to be shackled to a desktop and may be using your mobile devices when you are at home too.

And when we install any type of data cables etc., you can be sure that you will get the kind of connectivity you want and enjoy watching movies, TV via your mobile devices. In short, we are the experts that can handle every type of data installation and Wi-Fi connectivity requirement on your residential premises.

For more information, simply speak with the experts at Allround Electrical and take our advice on various aspects of electrical and data installations. The number to call is – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

We’ve recently added four new CAN Bus LED festoon bulbs. These 6418, 6451 festoon bulbs are designed to communicate with vehicle CAN Bus computer systems and prevent “bulb out” error messages. They can be used for numerous applications, such as map lights, dome lights, vanity lights, trunk lights, and footwell lights.

Powerful cool white LEDs are mounted to one side of the bulb’s printed circuit board for direct illumination without wasted light, and an LED-cooling heat sink is incorporated into the back of the board. These error-free bulbs are designed to last 25 times longer than incandescent bulbs.

FAQ post.

Air conditioning systems are complex electro-magnetic appliances that can very easily have an electrical issue develop at one time or another. If there is any time that safety trumps convenience, it’s when you have an electrical problem. So, be sure to contact the professionals on our team if you suspect you have an AC electrical problem, as our staff is highly trained and licensed to do this type of work. First though, you should understand what some of the most common AC electrical problems are.

Your AC system houses 3 different motors: 2 fan motors—the condenser and indoor blower—and the compressor motor. Since your AC system functions on an alternating current, these motors require 2 capacitors—a start capacitor and a run capacitor—that helps your AC start up and maintain its electrical flow. When you run into an issue with either capacitor on any of the motors, then you’ll probably observe stuttering at start-up, intermittent operational problems, or even a total breakdown of the motor itself.

There are many wires running throughout your AC system. With natural wear and tear over the years, these wires can begin to fray, corrode or disconnect. This can cause issues with electrical flow and overall operation. Locating faulty wiring can be tricky and should only be left to trained professionals.

Your AC draws enough power that it requires its own breaker in your home’s electrical panel. Because of the intense demands on this system, problems can develop. Common issues are related to a breaker that is faulty, undersized, or loose. While loose breakers may be tightened, an undersized or faulty breaker has to be replaced by an electrician who has the knowledge of how to do so safely and accurately.

Ready.gov recommends that you keep an emergency kit in your car with a few essentials:

When branches become heavy with ice and fall on power lines, many are left without electricity and need to find alternate sources for keeping their home warm and safe.

If you live in the South, you know this: if it snows, you can pretty much count on school being cancelled. By about day three of last week’s #snowcation, videos started popping up in my news feed of kids dancing on kitchen tables and singing their 800th rendition of “Let It Go” while frazzled parents held onto their sanity. What’s a parent to do? The web is full of great ideas that creative parents have come up with, but here are a few of my favorites:

Growing up in North Carolina, the novelty of a real winter snowfall still catches me by surprise. By being as prepared as I can, I’m able to spend time enjoying the magic of winter with my family. How do you prepare for a winter storm? Do you have any creative ideas for keeping home-bound kiddos entertained?

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.