MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save

There is a very dangerous myth floating around, one which could actually result in severe injury and even death – “Electricity always follows the path of least resistance”. This is one of those myths that results from a general fact being blown way out of proportion.

Forget colleges and engineering schools, most high school students learn that electricity does behave this way, as a part of the basics of electricity and resistances. Worryingly, this myth isn’t just stated as a fact, it’s a commonly followed practice in many electrical circuit designs, especially when it comes to grounding.

Walk into any industrial plant that uses motors or pumps and you’ll find they’re all connected to ground rods. Ask anyone why that’s done and you’ll likely get the same response everywhere (even from the people in charge of the electrical maintenance) – It’s to eliminate the potential differences.

Available in a variety of shapes and sizes and with multiple base types, these long-lasting LED bulbs are perfect for an elegant, vintage look. Chips-on-board (COB) LEDs imitate the look of thin filament wire in antique-style bulbs and emit a rich, warm white or ultra-warm white color. The decorative bulbs are great for many applications, such as chandeliers, wall sconces, ornamental fixtures, and light strands, and they consume only a fraction of the energy consumed by incandescent bulbs.

LEDs are the longest lasting lighting technology available today. They contain no harmful gasses and are safer for the environment than incandescent bulbs. But if there’s one fact about LEDs that’s considered the most, it’s that they’re extremely energy efficient and are designed to save money! We wanted to show you the results of switching from incandescent bulbs to LEDs, so we developed an LED 

Among other helpful pieces of information, the calculator lists savings per month, savings per year, savings on incandescent bulb replacements, and a break-even point that tells you how long it will take to notice those savings. Here is an example of calculated savings for replacing 10 incandescent bulbs with LED bulbs: