Did you know that proper surge protection could help avoid short circuits and fire hazards?  In fact, using up-to-date surge protectors (suppressors) for your appliances, or even your entire house, could save you thousands of dollars in property damage. These are just a few reasons why surge protection should be of the utmost importance for you and your home this holiday season.

What are power surges?

First, before diving deeper into the different advantages of protecting your home against power surges, it’s important to understand what electrical surges are, and why they’re such a concern. An electrical surge, also known as a “voltage surge”, is an electrical disturbance that can be caused by a variety of spikes in voltage. More specifically, these surges are usually caused by lightning strikes, power outages, short circuits, or tripped circuit breakers. Problems occur when these short spikes in electrical power overload circuits in home appliances and other electronics.

Why is it so important to protect your home against power surges?

For starters, power surges can be very dangerous for you, your family, and your house. Surges are one of the most common causes of house fires, usually resulting from a combination of faulty wiring and irresponsible electronics hook-up by homeowners. This is especially apparent around the holidays.

We’re proud to announce the arrival of new high-CRI architectural retrofit LED downlights. The LED lights are available in a variety of sizes and wattages for applications ranging from retail, commercial, grocery store, hospital, and auditorium lighting to bathroom, basement, and kitchen lighting. Can light replacements have integral junction boxes with round and square knockouts, and architectural downlights are equipped with driver enclosure boxes. These energy-efficient LED lights can be easily wired to code and are IC rated for safe contact with insulation.

Comfort and convenience – these should be your two main goals when creating a nursery lighting scheme. Babies are extra-sensitive to harsh lighting, so you should use lights that are gentle and calming to their young eyes. However, you still need enough light to perform necessary tasks quickly and easily.

Just follow these 5 lighting rules, and your nursery will be in ship-shape and ready for baby in no time:

1. Choose soft ceiling lights.

This week, I participated in a weekly twitter chat calledTweetChat, with whom I have no affiliation but do use) Wednesdays at 2 p.m. EST and use the hashtag #KBTribeChat. Information about the interesting conversation. One of the questions was about using lighting to personal kitchens and baths. Of course, this got me very excited. I inadvertently learned that Twitter is great if you have a little that you kind of want to say. It’s terrible when you have a LOT that you REALLY want to say. That 140 character limit becomes a cruel, tyrannical constraint. So I thought to myself: You’ll just have to wait until you get back home to the blog, where you can write actual paragraphs, to answer this question. Ahhh. It feels good now to have a little room to stretch out.

So, how can you use lighting to personalize a space? Here are 4 things to keep in mind.

1) Fixture and Light Source

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.