How often have you found yourself considering getting some vacuuming done in your home, only to put it off because it’s simply too much physical work and takes too much time? Vacuuming a home, especially a multi-story home, can be an unpleasant and cumbersome chore. If procrastinating about cleaning your home is something you do often, you should consider installing a central vacuum system to make the job much easier. With a central vacuum, you only need to carry a lightweight hose attachment around the house. You then plug it into a local outlet that connects to a central pressurized suction system. You can vacuum the area around the outlet, and all the debris is moved to a single collection point that you can empty at your own convenience.

Putting in a central vacuum in a home is a complex process that requires numerous special tools and knowledge of ventilation systems, so you must have professionals handle the work. To arrange for central vacuum system installation in Needham, MA, install a central vacuum system, the technicians first determine the number of outlets necessary and then place both the outlets and the power unit: i.e. the vacuum itself, which is housed out of the way in the garage or basement. Once the installers have these two different sets of terminal points in place, they install a trunk line that runs from the vacuum through the walls. From this trunk line, they branch off a number of flexible tubes to connect to each outlet. The technicians must run voltage wires along the trunk and the tubes back to the vacuum unit, since the portable cleaning attachment requires electrical power to run.

It is also important for the installers to set up an exhaust system for the power unit. It’s optimal for the vacuum to vent directly through a wall, but if this is not possible because of the placement of the power unit, the installers will instead run exhaust tubes to a roof vent.

Once all the parts are in place, the installers perform a vacuum leakage test to make sure there are no spots along the trunk line or branch tubes where there is any air escaping.

Afterwards, you can start enjoying a cleaner house with much less work. Contact us today to find out more about this and other electrical installations we do in the area.

With the professionals at FB Electrical Services on the job, you can expect to have your central vacuum system installation in Needham, MA complete in a few hours.

Two costs are associated with any electrical appliance: the buying price, and the running cost in terms of energy and maintenance. Of the running costs, energy is one of the major items. Typically, the equipment can last several years before requiring a major repair.

Consumers should therefore not just look at the price tag on the item.  Rather, pay attention to its energy rating and available energy saving modes.

Energy star certified refrigerators and freezers are at least 9 and 10 percent more efficient respectively. Other considerations that help in saving energy include selecting the adequate capacity. In addition, the refrigerator or freezer should be kept in a cool place away from heat sources such as direct sunlight or ovens.

More energy savings can be realized by using the proper settings. In addition, ensure the door is closed all the time and that seals are in place. Place the refrigerator or freezer in a spot that allows free air circulation around the fridge; especially at the back where there are cooling pipes.

Manual defrost freezer models use less energy and are therefore more efficient than the automatic defrost models. Another important factor is the design of the freezer. An upright freezer with shelves is easier to organize. However, the chest freezer may be more energy efficient since there is less cold air escaping from the door which opens from the top.

These are usually 40 percent more efficient than the standard purifiers. Other factors to consider include the room size and placement. Select a model adequate for the room; otherwise, an oversized air purifier or cleaner will end up consuming more power unnecessarily.

Energy star certified dishwashers use at least 12 percent less energy and 15 percent less water than the conventional models. However, this may vary depending on the model and other factors.

These dishwashers utilize more efficient technologies that reduce both the energy consumption and water usage. For example, the design uses soil sensors that check the amount of dirt on the dishes.  An optimized cleaning cycle reduces the minimum amount of energy and water. In addition, there are more efficient water jets and a dish rack design that ensures efficient use of water and energy.

Energy Star dehumidifiers

Certified dehumidifiers use 15 percent less energy. They utilize more efficient compressors, refrigeration coils, and fans.

Washing machines

Energy star certified washing machines are usually 25 percent more energy efficient than their equivalent standard models. In addition, they use 40 percent less water. This results in the consumer saving water, as well as energy for both the washing machine and the water pump.

Clothes dryers

Certified dryers use at least 20 percent less energy than the standard models. The equipment utilizes more efficient technologies such as heat pumps. Moisture sensors automatically stop the drying cycle once the clothes are dry. This sensor-based drying machine is more efficient compared to thermostat or timed drying, which continues to consume energy even after clothes are dry.

Televisions qualify for energy star certification when they become at least 20 percent more efficient. Some models can reach up to 40% better efficiency than traditional models, while the set-top boxes can achieve up to 45 %. However, the amount of power used depends on the size of the TV screen, display technology, and resolution.

The home theater systems that are energy star certified are 60 percent more efficient. Certified battery chargers for small household appliances such as power tools, electric shavers, and cordless gadgets use 30 percent less energy.

How many light bulbs have you changed in your lifetime? It’s a simple action, and often one that we don’t put much thought into, but what if the simple act of changing a light bulb could make a profound impact on the environment, and the well-being of future generations?  As experienced www.EnergyStar.gov:

“If every American home replaced just one light bulb with a light bulb that’s earned the ENERGY STAR, we would save enough energy to light 3 million homes for a year, save about $600 million in annual energy costs, and prevent 9 billion pounds of greenhouse gas emissions per year, equivalent to those from about 800,000 cars.”

Think about the changes that you can make by simply replacing the outdated incandescent bulbs in your home as they burn out with one of the Alternative Lighting Solutions below. Here are some details on a couple of the most popular Alternative Lighting Solutions available.

Compact Fluorescent Lamp: Modern CFL bulbs for use in homes consist of a curved fluorescent tube and electronic ballast in a single unit, designed as a direct replacement for standard blubs. They use 3-4 times less power than comparable incandescent bulbs. These are great options to replace your standard light bulbs, but they do have a few small drawbacks. According to an article by PopularMechanics.com, while CFL’s do have a much longer lifespan than standard bulbs, they often lose some of their brightness long before their expected lifespan is up, and this is increased in fixtures that don’t allow for efficient cooling of the ballast located in the base of the bulb. Another documented fact about CFL bulbs is that they do contain mercury, which means that they must be disposed of properly by taking them your local approved recycling center. You wouldn’t throw a battery out with the daily trash would you? So you shouldn’t throw these out either.

Light Emitting Diodes: LED’s are a form of “solid state” lighting that have become available recently to homeowners as an incandescent and CFL replacement. Using small light emitting diodes mounted directly to circuit boards, these are highly efficient, and have fewer parts prone to failure, allowing for an expected realistic lifespan of 20,000 to 30,000 hours, when operated at recommended temperatures. While initial costs for these bulbs are higher than incandescent and CFL options, long term energy savings are where this alternative lighting option truly shines, with the average LED bulb using approximately 12-17% of the energy that it takes to run an incandescent bulb of similar output, the end result is a bulb that costs drastically less to power over time.

As a point of comparison, here is a simple chart of the energy usage of LED and CFL bulbs compared to incandescent bulbs, and the output associated with them:

Lighting technology has changed a lot in the past decade, and it is pretty amazing to see what could be on the horizon for future lighting innovations. Take this for example. While most homes will never need this amount of output, it’s pretty impressive to see that something the size of a Christmas tree light, like this plasma bulb, can put out more light, more efficiently, than the giant bulbs that we use in street lamps!

The great thing about these changes is that they aren’t something that requires a huge change in your lifestyle, so they are some of the easiest ways possible to help the environment, and lower electric bills while you are at it!

About ElectricMan Inc.