How do tripped circuit breakers happen in the first place? An overloaded circuit is the most common reason for a breaker tripping and usually happens when a circuit has more electrical load connected to it than it really should have. Let’s say you have a 15 Amp circuit breaker that is protecting a 15 Amp circuit. If 20 Amps of current start flowing through it because a toaster, TV, radio and space heater were all connected to the same circuit and were on at the same time, then what you’re left with are tripped circuit breakers aimed to prevent overheating of the circuit.

Allow Kolb Electric, one of the premier electricians in Alexandria, Arlington, Fairfax and all of Northern VA, to guide you through the process of resetting tripped circuit breakers, which is actually quite easy.

If your breaker continues to trip immediately after you’ve reset it, this is indicative of a direct short. Do not try to reset your breakers at this point. If these steps don’t help you resolve your tripped circuit breaker problem, it’s time for you to contact a quality electrician in Virginia who can uncover the source of the problem, which could be due to one of the following:

You already have a smart phone – maybe even a smart thermostat. What's next? Believe it or not, refrigerators are next in the line of devices with advanced features and technology to improve our domestic lives. A new smart fridge, manufactured by GE, is scheduled to come on the market this spring.

Welcome to the Future

For the average household, the refrigerator is the third-largest energy drain after the HVAC system and the hot water heater. That means there's a lot of room to improve on efficiency.

Your garden-variety refrigerator really only has one setting to manipulate: the temperature. And the EPA recommends setting it between 35 and 38 degrees, so there's not a lot of leeway in that regard before you risk spoiling your food. The real value in a smart fridge  is in its communication with you, reminding you to adjust your behavior and not waste any unnecessary energy.

For example, if you leave the door open, a smart fridge can alert you to close it rather than wasting all that cold air. If it's time to clean the coils, it gives you a heads up, so it can continue to operate at peak efficiency. If the power usage suddenly spikes for no apparent reason, the fridge lets you know so you can have it serviced to correct the problem.

The EPA is encouraging manufacturers to include such smart features in their products. “These features would offer consumers more ways to reduce the energy consumption of their refrigerators and freezers, help lower their utility bills, and better protect the environment and the climate,” the agency says. “Refrigerators and freezers with connected functionality will also be “smart grid”-ready, meaning that with consumer permission, they will be able to respond to utility signals, including curtailing operations during more expensive peak demand times.”

Savings Beyond Belief

If your refrigerator is more than a decade old, it's costing you more money than it should in electricity usage. If it's more than two decades old, it's really draining your finances. That good news is that the new models are so efficient they could pay for themselves in utility savings within a few years. New federal standards kicked in for refrigerators last fall, which means that the latest models are performing at an all-time peak.

When you go fridge shopping, make sure you purchase a model that bears the Energy Star logo, which means it performs at least 10 percent above and beyond the minimum federal efficiency requirements. “We can all do our part in meeting the challenge of climate change,” said Janet McCabe, Principal Deputy Assistant Administrator for EPA's Office of Air and Radiation, in a press release. “By choosing Energy Star appliances, families can save energy, save money, and reduce carbon pollution.”

If every fridge and freezer in the country were updated to meet just the minimum requirements, homeowners would save a cumulative $890 million annually on their energy bills. Even if your share is just a small fraction of that, every bit counts.

If you are not an electrician, you probably don’t pay a great deal of attention to the gray boxes inside or outside the home. Those rectangle boxes are filled with wires and breakers and for the average person, it is a lot of chaos that doesn’t mean a whole lot except that it has something to do with the electricity that goes to the home. When things go wrong with the electric panel, only a trained electrician in Beverly Hills, like those at The Electric Connection, should service the panel. The panel is the hub of the electricity that comes in from the main power grid and distributes it throughout your house.

Most panels will last for decades without any issues. However, there have been several brands and models that have been made in the 90s that are substandard. There are actually some serious safety issues with the panels. It isn’t something you are expected to know, but you can rely on a Beverly Hills electrician to inspect the current panel and let you know if you have one that has been recalled. While the electrician is there, a thorough inspection of the panel can also be performed. This will identify any issues that may be happening.

Another reason to service the electric panel is for an upgrade. Upgrades should only be completed by a certified electrician. Beverly Hills homeowners who need more power to a specific room or need to add a large appliance like a refrigerator, electric car charger or a new air conditioning unit will need to have their panel serviced and possibly upgraded. This is something an electrician can take care of. If you are unsure about the condition of your electric panel or want to have an upgrade performed, give The Electric Connection a call today and schedule your appointment.