Handing over the responsibility of planning the layout of your home to the builder can be a huge relief. However, by doing so, you are leaving the builder with a hazy idea about your requirements. And this matters a lot especially in the case of electrical and lighting layouts.

The electrical and lighting plans of your home are as important as all the other plans. So before commencing the construction, consider adding these 6 essential points in the layout.

Follow this simple rule for every room and space in and around your house. Start with the functionality of that room or space. Next decide on the configuration of furniture in that area. And then, draft the lighting and electrical layout accordingly. In this way, you will not over-light or under-light any portion of your home.

Also, you can either consult an expert or do an in-depth research about the current lighting trends in the market. No matter how much you love a certain lighting trend, if it’s outdated, there’s a good chance that it won’t complement the current design elements of your house.

Security, lighting, cooling, heating – there are multiple control panels which you may find essential for your home. So decide on the specific types and number of these panels early. Doing so will help you mark their exact and convenient locations, in the layout itself, and save you a lot of hassles later.

These are the kind of electrical elements which most of the people would want to keep out of their sight. But, that might not be a practical thing to do in some of the cases. For your bathrooms, you might want to hide the power points inside the cabinets. However, when you need to use your hair dryer, you will have to keep the door of the cabinet open. And if it is a face cabinet, you won’t be able to use the mirror. Small things like this make a huge difference to your routine activities. For art aficionados, imagine the dismay of seeing a power point right next to their prized possession of a famous work of art. Hence, it would be wise to decide and ink in the places for power points in the electrical layout itself.

Imagine opening your garage door and fumbling your way to the switch board to turn on the lights. And, the irritation your guests might face while trying to figure out the correct switch required. Exactly the reason, why you should think of automated lighting. And as for the switches, you can replace them with customized images of pantry, garage, laundry etc. This kind of detailing goes a long way in making your life more convenient and your home more comfortable for your family and guests.

Outdoor spaces of homes have today become an intrinsic part of their inhabitant’s social lives. If this holds true for you as well, you should definitely factor in illumination of areas such as decks, patios, pools etc., in the electrical and lighting layout. An ideal choice would be weather proof electrical outlets. Whether you want to accent foliage, light a pathway, overhead lighting and ground-level outlets for the swimming pool, it is essential that you chalk in all of your needs in the electrical and lighting plans.

Documenting the placements of electrical and lighting elements is a must. Be it written plans and drawings, or photographs. These records will save you a lot of trouble in future, when you need to do any type of renovation or even repairs.

All the above mentioned aspects will help you plan every small and big electrical and lighting aspect of your home effectively. So save yourself a lot of trouble and unnecessary expenses which might arise in future, if you don’t plan the electrical and lighting aspects of your home at the design stage itself.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

These LED lights attach easily to the front and rear of your bike. The white light clips to the front break cables to help you see where you’re going, and signal to others that you’re heading their way. The red light clips to your seat rails, brightly marking your bike’s rear. They both operate in steady beam and continuous flash modes, visible from up to a mile away. They’re weather resistant and have a long battery life.

2. Twist On Bike Lights