Although you may not think that an electrical malfunction is liable to happen to you, studies have shown that the majority of all house fires result from some sort of electrical malfunction. Furthermore, many of the homeowners affected by these fires reported that something seemed somewhat wrong, but unimportant. As a result, the issue was ignored, leading to a catastrophic fire. Because of this, it is very important to address any electrical odors or other issues that could eventually lead to dangerous shock or fire. Never underestimate the power of your electrical system, and be familiar with the signs and symptoms below that could signal a dangerous electrical problem.

Frequently Tripped Circuit Breakers

If a circuit breaker in your home trips constantly, you should treat this as a potentially serious electrical issue. Whenever this happens, there are a variety of things that you can do. You should, however, start by calling an electrician in Burbank to discuss the problem. Your circuit breaker is designed to stop the flow of electricity into your home whenever dangerous or inconsistent levels of electricity are detected. This could happen because of an overloaded circuit, short circuit or ground fault. Check to see if your circuit is overloaded, and then call your electrician. This could be much more than a minor annoyance.

Outdated Electrical Systems (Fuse Boxes)

If your home is still equipped with an older fuse box, you should call your Burbank electrician to have them perform an electrical service upgrade. Because these systems were not designed to handle the electrical load that we require today, fuses blow frequently and can result in dangerous situations.

Other Warning Signs:

You owe it to yourself to keep your electrical system as safe as possible. If you experience any of these signs and symptoms, or just feel like something might be wrong, call The Electric Connection today.

Visit our company profile.

If you live in a sunny climate like we enjoy here in southern California, you might be considering adding solar panels to your home. Home solar arrays are becoming increasingly popular, but is it the right choice for you? Perhaps understanding the reasons to install solar panels might help you make up your mind. Here are a few of the reasons you should install solar panels now:

1. They’ve Never Been More Efficient – Solar panels are now far more efficient at converting solar energy, with at least 12 percent of the available solar energy on their surfaces converted into power. Combine that with dropping prices, now below $6 per megawatt, and the cost of investing in solar has never been lower.

2. Incentives and Tax Breaks – With a variety of federal, state and local incentives, you can now cut the low prices on solar even further. The federal government offers a credit of up to 30 percent off the cost of your system. Add the ample fiscal incentives offered in the state of California to create a truly winning proposition.

3. Stability During Climbing Energy Prices – Electricity climbs an average of five percent a year, while your solar panels will give you the same amount of energy every year, meaning that your saving actually grows with time.

4. Greater Property Value – More people are recognizing the value of solar panels and are looking for homes that have this built in power source. You can be sure that a solar array will add value to your home.

If those reasons aren’t quite enough, you’ll be convinced once you explore the possibility of solar leasing that gives you the potential to install and purchase a home with no money down. Not every home owner is eligible but if you are, you can enjoy growing savings at no initial cost. Call us today to see if you’re ready and qualified for solar leasing.

With the winter months closing in, there are some things you need to know before you pull out that portable electric heater. Sure your feet may get cold under your desk or your bathroom is a little cooler than you would like in the morning, but before you plug in that space heater you need to get informed. These are some tips from your Santa Monica electrician when using any space heaters this winter.

Your space heater should be placed as close to the center of the room as possible to ensure nothing comes in contact with the heater. You don’t want furniture, drapes, paper products or anything else touching the heater and creating a fire hazard.

Ventilation is crucial to any electrical appliance. It needs room to breathe so to speak. Heaters should never be placed up against a wall or any other surface. Anything electrical needs proper ventilation. This can be taken care of by an electrician. Santa Monica homeowners who are not sure what is needed should definitely contact a professional.

The last consideration when pulling out the space heaters this winter is the cord condition. Before you plug anything in, check the cord to make sure it is not frayed or damaged in any way. This can be a major fire hazard if there are any loose or exposed wires or areas where the insulation around the cord is thin. The heater should be plugged directly into an outlet and never an extension cord. The cord should also run along a wall or somewhere out of the way of foot traffic to avoid it becoming damaged.

These tips can be applied to any electrical appliance. If you have any more concerns or questions about a space heater, give The Electric Connection a call today. We are here to answer any questions you may have.

Recessed lighting has recently become a popular style choice among home owners and builders, as well as for commercial buildings. It provides a neat and clean appearance that provides light without interrupting the flow of the room or the lines of the ceiling, or in some cases a wall. There are a few things you need to know if considering using recessed lighting either as part of a new home being built or as a renovation project in your current abode.

Design Choices

The design choice of recessed lighting provides clear advantages over other types of lighting. There is less chance to make a “wrong” choice, as the fixture itself doesn’t present as traditional lighting. A bit of the frame may show and you can pick the color or material, but there aren’t really shapes, sizes and style choices that aren’t readily apparent as what befits the room. Typically a plain white that matches the flat white of your ceiling paint on either a square or round frame is going to match any home. It’s an especially great choice for the neutrality of adding lighting to an investment home.

Installation

The installation of recessed lighting does require a bit of planning in order to be conducted properly. Of course it’s always an option to replace traditional fixtures with recessed lights, but it’s really easier to plan them with a new building or during a major remodel while the walls are torn down. The lights have to be placed properly to both provide their function of lighting the room while maintaining a notable aesthetic that doesn’t detract from other focal points in the room.

Usage