If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!

One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.

We can always find ways to save a few extra dollars, but sometimes it can be little difficult to pinpoint exactly where those savings are to be had. You may look at the budget over and over and still keep coming up with the same bottom line. An electrician in Santa Monica can help you discover a few ways you could cut your electric bill without dramatically changing your lifestyle. If you ever have any questions or concerns about these tips, you can call The Electric Connection to ask more questions.

1-Get rid of any of those remaining incandescent light bulbs. They are costing you money. You can shave 20 percent off your electric bill simply by relying on CFL and LED bulbs that are much more energy efficient. They tend to be a bit brighter as well.

2-Have a ceiling fan installed in a central room of your house. This will help circulate hot and cold air produced by your furnace or air conditioner. Ceiling fans run on a fraction of the electricity of a heating or air conditioning unit. It is a good idea to have the fan installed by someone familiar with Santa Monica electrical codes.

3-Ask every member of the household to shave off 2 minutes from their average shower time. This can save a lot of money on your electric bill by reducing the demand put on the hot water heater. You could also turn down the thermostat of the water heater by about 5 to 10 degrees and save even more money.

4-Unplug any appliances, computers and electronics when they are not in use. When you leave for the day or go to bed at night, unplugging your electronics can save you money on wasted phantom power.

Give The Electric Connection a call today to have your ceiling fan installed or to learn more about energy savings.