Tube lights are found in many applications and environments such as office buildings, hallways, garages, and really anywhere that has a low and flat ceiling. Although fluorescent tubes contain small amounts of mercury and isn’t a whole lot, you still want to avoid the breaking of a fluorescent tube and any exposure to mercury if possible.

Whether you are simply replacing a burnt out fluorescent tube with a new one or are switching over to a new technology (such as LED), there is a proper way to do it. By following these steps along with others that you may find, you will allow yourself to reduce risk of harm for yourself, staff, or whoever is the one physically replacing the tube lights.

Let’s answer some common questions and issues that people seem to face when tasked with this issue of replacing mercury filled fluorescent tubes…

By recycling rather than simply throwing away your tube lights, you opt-in for the environmentally friendly route of switching out old tubes. If you choose not to recycle, you are allowing toxic mercury to freely enter the environment, which of course is not good.

Not only do you prevent mercury from freely entering the environment by recycling, but you also reduce waste. How exactly? Part of the tube is reused for new tubes that will be resold and used. This allows for less waste and this goes back to the saying “Reduce, Reused, Recycle.” So by taking part of fluorescent tube recycling, you allow the process of recycling to continue and prevent waste from entering the landfill!

When taking your tubes out to bring for recycling, this is probably the most difficult step you need to be most cautious with. The best option you have is to be prepared and know what to do if things go “south” as they like to say.

Here is what you can do to prepare for the removal of fluorescent fixtures:

And for one thing that you should always remember for dealing with a broken tube is this: NEVER VACUUM. By vacuuming, you make glass particles go airborne and that is a highly dangerous situation to be in.

For more tips on how to clean up a broken fluorescent or CFL lights, using this tool from Earth911. It allows you to search what you need to recycle and where you are located. So you go to that tool, type in ‘fluorescent’ or ‘CFL’ along with your location and you will surely come across the closest place to recycle fluorescent tubes (along with really anything else you may want to recycle).

If you are in the process of disposing and recycling your fluorescent tubes, what is going in there to replace the ones you are removing? If the answer is “more fluorescent tubes,” may we ask why?

Did you know that proper surge protection could help avoid short circuits and fire hazards?  In fact, using up-to-date surge protectors (suppressors) for your appliances, or even your entire house, could save you thousands of dollars in property damage. These are just a few reasons why surge protection should be of the utmost importance for you and your home this holiday season.

What are power surges?

First, before diving deeper into the different advantages of protecting your home against power surges, it’s important to understand what electrical surges are, and why they’re such a concern. An electrical surge, also known as a “voltage surge”, is an electrical disturbance that can be caused by a variety of spikes in voltage. More specifically, these surges are usually caused by lightning strikes, power outages, short circuits, or tripped circuit breakers. Problems occur when these short spikes in electrical power overload circuits in home appliances and other electronics.

Why is it so important to protect your home against power surges?

For starters, power surges can be very dangerous for you, your family, and your house. Surges are one of the most common causes of house fires, usually resulting from a combination of faulty wiring and irresponsible electronics hook-up by homeowners. This is especially apparent around the holidays.

Your home is likely one of the biggest investments you have. The people that live in your home are extremely important to you and you probably have plenty of monetarily valuable items in your home. It makes sense you would want to protect your home and the people who live in it. There are a few things you can do to make your home a little safer. With the help of a Beverly Hills electrician, you can rest easy knowing you have taken care of the little things that have been known to cause major accidents.

Updating the Outlets

With technology and electrical science constantly improving and evolving, we have been given something knows as the GFI outlet. The ground fault interruption outlet can prevent electric shock when installed by an electrician in Beverly Hills. These outlets are perfect for placing in the kitchen and bath areas where water is typically used. Should an electrical appliance come in contact with the water, the circuit is shut off in order to prevent the person using the appliance from being shocked.

Hard-Wired Smoke Detectors

You can add seconds or possibly minutes to your family’s notification of a fire in the home with hard-wired smoke detectors. When a single detector is set off, all the alarms in the house will sound, even if they are clear at the other end of the hallway or upstairs. These alarms are hard-wired into the home’s main electric and will need to be installed by an electrician. Beverly Hills homeowners will appreciate knowing the install has been completed by a professional.

Security Lights

Having a light shining on the driveway and a clear path to the front door will make you feel better when you or a family member comes home after dark. Being able to see your surroundings adds peace of mind while repelling predators.

Give The Electric Connection a call today and schedule your appointment to make your home a little safer.

Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.