Most people are familiar with smoke alarms or detectors as they are requirements in all commercial and residential buildings. But how do they work? And how do you ensure that they are functioning at their top performance?  If properly maintained, smoke alarms can and have been proven to save millions of lives in the case of a fire.

In general, there are two different types of smoke alarms.

Ionization means that the device is equipped with two plates that create a charge. When smoke passes between these plates, the charge is interrupted and forces the alarm to sound. In contrast, a photoelectric smoke detection system works similarly but is equipped with a light beam. When smoke passes in front of the light, the alarm sounds. Each function is beneficial in different instances and because of this, one is not necessarily better than the other. It is, however, recommended to have one of each of these functions on each floor of your home and in high-risk areas such as the kitchen or near fireplaces or heating appliances.

To ensure your family’s safety, it is recommended to check your smoke alarm once a month. In order to do so, you can simply push the test button on the smoke alarm. If it does not sound the alarm, you should check the battery and replace it immediately. You could also light a match near the smoke alarm to ensure that it is functioning at top performance.

For more tips and assistance with your smoke alarm maintenance, contact one of our electricians at Expert Electric – 604.681.8338.

It seams that as the year progresses each season comes with its own positives and negatives. We have been fortunate to have a very beautiful spring so far, and looks like we will be in for a very hot summer. This means that we should all be getting out our sunscreen and turning up our air conditioning units. But if you want to save money on your energy bill this spring and summer, check out some of these tips that can help you cool down on a budget. 

When it is hot outdoors and the warm air is trying to come in, you don’t want to start creating your own warm air inside. Turning on the oven or stove in your kitchen will start to give off additional heat that you then attempt to reduce through the thermostat control. You can avoid this battle of temperatures through proper meal planning and using the BBQ. This will help you to keep the thermostat where it is without using additional electricity to fight energy use!

At night it tends to cool down, but a hot bedroom can lead to a restless sleep. These dark hours are an opportunity for you to save money by eliminating those additional cooling devices. To keep yourself as cool as possible at night without out electrical devices, use cotton sheets. Cotton provides breathability and allows the heat to escape. Seasonal bedding like this is an energy smart decision. Use flannel/fleece for winter, and cotton for summer.

Instead of powering up your AC unit to cool your entire home, try using small, oscillating fans in strategic places to keep you cool. If you are sitting on your couch in the living room then this is the only room that needs to be cooled. Turn a fan toward you and enjoy. It is much cheaper to power one or two small fans than an entire AC unit.

This is a simple fix that can certainly help those with large windows in your home. While your summer view may be beautiful, the sunrays will beam in an heat up your living space. Close your blinds to keep it out and you will notice a significant decrease in temperature. At night when the sunsets you can open them back up and even open the windows to let the cooler breeze through. This way you can still enjoy a nice evening and take advantage of your views.

While we love electricity as it has allowed us to live comfortable lives, we should use it wisely as it can increase our monthly bills. If you are interested in installing energy efficient light bulbs, AC units, or improving your home electrical bills, contact Expert Electric at 604-681-8338. Our licenced electricians can identify where you can save your money the most.

When you’re purchasing LED strip lights, there are numerous details and specifications upon which to base your decision. Color, length, and intensity are some of the major deciding factors, but there are many unthought-of product aspects that further customize light strips and what they’ll require when it’s time to install them. For example, a decision between 24-volt strip lights could change the products needed for your project.

While it depends on a light strip’s current draw, LED type, and number of LEDs, 24-volt LED strip lights tend to have longer maximum runs than 12-volt strips. This is because higher voltage carries more power. All strips have a maximum run, which is the length of continuous strip that can be powered without experiencing voltage drop. Voltage drop happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). If a run of strip is too long, reduced energy across the strip will lessen its intensity near the end.

Because they can handle more power, many 24-volt LED strip lights tend to have brighter LEDs, dual-row LED configurations, or single-row configurations of more LEDs. In these instances, maximum run might be the same as a 12-volt strip. However, keep in mind that these are more powerful strips with more LEDs or higher LED intensities. An identical 12-volt LED strip light would have a shorter maximum run.

Make sure to check any light strip’s specifications or description for its maximum run.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

For anyone who is in control, manages, or even owns a facility that has a parking lot for either employees, customers and clients, or both; you know that security and protection of everyone is paramount.

With outdated, inefficient, and low quality output per watt, which is all that matters when it comes to getting the most efficient lighting. The reasons behind this is because let’s say you have two different LEDs products, one outputs 135 lumens per watt while the other is at 120 lumens / watt. To power a light that outputs at 18,000 lumens; the 120 lumen per watt fixture will take 150 watts to reach 18,000 total lumens. While the 135 lumen per watt fixture will only require approximately 133 watts to generate same exact amount of light that the other higher watt fixture products.

See the important of lumens per watt? It’s everything, and we believe

Here’s another project of ours where we retrofitted an existing fixture in a parking lot (before and after):

The image list could go on, but the gist is this: LED has and will always improve your facility’s lot. Just look at the images yourself for the proof!

By choosing LED parking lot products for your facility, you are choosing higher quality along with higher efficiency products. LEDs (more specifically MyLEDLightingGuide’s) offer a better Color Rendering Index rating talked about before is about lumen depreciation. Metal halide and HPS experience greater and quicker depreciation in lumen output than any LED product does. So while a brand new and freshly installed metal halide fixture may look the same as an LED to start off its life; give it a few years and watch the difference. LED is almost guaranteed to be brighter for longer.

On the topic of saving money, how about the final benefit that will make you fall in love with LED technology and what it can do for your business.

While you need to be careful which LED products you purchase and from where you buy them from; commercial LEDs are just as open to rebates as any other.

Something called DesignLights Consortium (DLC for short) qualifies products and lists them on their site if they pass vigorous tests set by them. They offer two types of listing: commercial rebates but they also prove to be lesser of quality. Think; if a company offers quality lights what’s their reason not to get qualified? There isn’t, and that’s exactly our point.

Thankfully there are many DLC qualified products out their on the market, including ours. You can always take a look around just to say hi!