Fixing things around the house is one of the joys of home ownership. It makes you feel accomplished and you can save a ton of money. It is a lot of work sometimes, but the excitement of tackling something that makes you feel a little more a part of your home is thrilling. Unfortunately, not every home improvement project or little fixes here and there are things you should attempt to take on if you don’t have the knowledge and training. Electrical work is one of those things. A Santa Monica electrician, like those at The Electric Connection, wants to warn you of some of the dangers you face when you take on a job that is above your skill level.

1-Property damage is a very real possibility when you attempt to fix something you are not really trained to repair. Messing around with electrical wiring can result in frying certain appliances or even melting the wires behind the walls. You would need to replace expensive appliances and possibly have to rewire that section of your home.

2-Fire is probably one of the most common problems associated with somebody unfamiliar with electrical work doing repairs they shouldn’t be. Melting wires or wires that are not connected properly can cause a spark that will set off a devastating fire. It is always best to hire a professional electrician. Santa Monica residents can feel safer knowing the wiring was taken care of by somebody who has been trained in the field.

3-Injury to the person doing the work is another very real possibility. Electrical shock can be deadly.

4-Nullifying home owner’s insurance policy may happen if an unlicensed person complete the work and a fire or other property damage occurs.

Don’t take the chance. Call The Electric Connection today and hire a licensed electrician to take care of your home’s electrical needs.

Museums have a hard line to walk, exhibiting items for public education and enjoyment while protecting those same collections from damage. Today’s museum also carry the additional weight of safeguarding the future of the environment – as well as their financial future – against the dangers of unnecessary energy consumption. What advancements have been made in preservation lighting technology to help accomplish these goals?

Light, including all three types: ultraviolet (UV), infrared, and visible light, causes permanent and irreversible damage to museum pieces. Cumulative and dependent on the intensity and duration of exposure, light affects chemical composition, physical structure, and, the appearance of a collection. There is no conservation treatment that can repair it. Light damage is forever.

Only complete darkness ensures conservation, since exposure to light in any form naturally breaks down items. However, keeping pieces locked away in the dark defeats the mission of the museum – sharing those works with the public. It is thus a museum’s dilemma to find a suitable solution that balances the best of both worlds, in addition to considering energy costs and the environmental impact of its lighting selection.  

In your search for preservation lighting, you will find that a great deal of lighting solutions involve UV (ultraviolet light), the most energetic and destructive form of light. These include natural light, fluorescents, HID, and tungsten halogen lighting. Fortunately, the effects of UV can be controlled with simple filters, offering a greater variety of lighting options. UV filters are hard plastic tubes or soft sleeves wrapped around bulbs/light sources, which filter and block up to 98 percent of UV light, preventing its damaging effects. NOTE: UV filters lose efficiency over time and must be replaced every eight-10 years.

Specific, detailed recommendations for preservation lighting levels based on your collection type can be found from various sources, including the Library of Congress, National Park Service, UNESCO, and more.

This post is part of a series designed to help newlyweds get the most out of lighting. Also be sure to check out our post about Click here for the perfect soundtrack for this post, then grab your bags and passports, because we’re taking you on a worldwide tour to find the most exsquisite, romantic lighting around the globe! The following list details some of the best honeymoon destinations in the world that are perfect for lovers of light.

1) Paris, France.

2) Las Vegas, Nevada, USA.

3) Alaska, Norway, Greenland… etc.

Basically, anywhere you can see the honeymoon packages that include viewing the northern lights, so you’ve definitely got a lot of options. Bonus: the University of Alaska has an Image via niagarafallslive.com

4)  Niagara Falls, New York, USA.

What’s better than mixing the breathtaking power of North America’s biggest waterfall with the dazzling glow of colored lights? You can enjoy the raw beauty of nature and the fascinating art of a light show at night. Combine that with the rustic charm of upstate New York and the Canadian border towns, and you won’t be disappointed!

5) Outer Banks, North Carolina, USA.

6) Anywhere you can get away from light polution.

An electrical circuit works as a loop where electricity flows from a source and then returns to that point again after powering the device connected to it. The power flow interrupts or stops if the path is broken. There are also receptacles, fixtures, or switches joined to the course through different types of electrical wiring.

Every electrical circuit has a specific breaker or fuse that controls it. Inside the main electrical panel of your house, you will find reference numbers to identify which breaker or fuse is assigned to which circuit. Mapping of them is a standard electrical safety procedure.

power company supplies electricity to your home through the transmission and distribution lines. The energy enters the service panel, also known as the fuse or breaker box, after passing through a meter. Then, the box has three wires (hot, neutral, and ground featuring insulation of different colors) that do the jobs of transmitting the power to an external outlet, returning to the source, and providing the ground.

The wires of your home are generally installed in three ways:

It’s a wiring system where a single electrical circuit supplies power for several devices. There are various housing boxes from where both hot and neutral wires emerge and run along the route. They branch off to single receptacle and fixture.

It’s the most common of all the systems seen in residential settings.

Switch Wiring

Installed on hot wires, such a system has switches that either transmit or break the current flow to various devices or lighting fixtures. A switch changes its position to allow or interrupt the flow of electricity to electrical machines and instruments.

The system routes the hot wire through various fixtures before joining to the neutral one, which then carries the power to the source. It’s the least used and most inconvenient of all the types because it connects the devices, i.e., lights in a series. So, the circuit breaks off when just one light is burnt out.

Parallel wiring is the best option for household settings because it does not break even when one of the connected fixtures goes kaput. Nevertheless, remember not to run too many electronics from one source because each circuit can carry only a maximum electrical flow.

Office spaces are a place for color temperature of 5600k, we don’t need to quite match this. A level between 5000k to 6000k will do fine for an office environment to prevent sleepiness.

Exposure to non-artifical light (aka, natural light from the sun) is known to this post by luxreview.com that should lead you in the right direction.

From there, ensuring you know all of the rules in your area will be the best route to ensuring you aren’t breaking any laws with an improper lighting system. The added benefit to following these rules is you can drastically reduce any possible liabilities you may incur if you had otherwise ignored these rules. So, we find it best to follow them!

Additional considerations

Not only are the above tips important to consider, but strongly considering LED office light technology can prove to supply the above benefits along with the following:

Energy savings.

It’s not uncommon for companies to list of 9 ways LED beats fluorescent on our blog, it’s certainly worth checking out.

Longer lifespans.

Longer life spans by 2 to 3 times is very common when converting to LED from other lighting technologies, just as much as its very common for the insane energy savings we talked about above.

This has two mains benefits which we always talk about: the less often need to buy replacement tubes as well as fewer maintenance costs to pay someone to replace those lights. We like to think of the second as an indirect way longer lifespans saves you money, and it’s certainly a great benefit.

Conclusion

We’ve not only covered tips to consider when implementing a better lighting system into your office but also why LED might be a great option for doing so while also reducing overhead costs. Hopefully, by following these tips you find your way to a more productive office and lower overhead.