Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.

Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

Did you know the lighting in your office could be making you feel sick?

Feeling unmotivated and lethargic, suffering from headaches or eyestrain? There are some simple steps you can take to energize the work environment to combat stress and elevate mood by choosing the best lamp for your desk or task lighting needs. 

Healthful illumination is key to an environment partnered with increased productivity and job satisfaction.  The trend today is to improve upon what you already have rather than investing in new construction.  Upgrading your office with affordable and energy-efficient lighting is an investment that leads to outstanding visual improvements and a more healthful work environment.

Employ the Right Lamps for Greater Health Benefits:

Top Picks for Office Lighting:

-Quoizel’s “Zen” collection includes floor and table lamps with Mystic Black finishes and Rattan shades for corporate casual decor.

Deciding whether or not to install solar panels is a big decision for anyone who owns a home or commercial building. The good news is that solar power is becoming more common, meaning that there are more installers and other companies that work with solar power. Because of this, you have more options when it comes to purchasing or financing your solar panels. Kim Hopkins, the owner of Solar Panel Info has set up this website to share his extensive knowledge of acquiring and installing solar panels. One of the most interesting things that discussed is the relatively new opportunity of the solar lease. Options such as this make the cost of solar panels attractive to many more buyers than ever before.

How Much Do Solar Panels Cost?

One of the greatest barriers to solar installation has always been the huge up-front investment that can be required. In recent years, however, there are many companies that offer alternatives to this, such as the solar lease. Programs such as this allow you to actually lease the panels for a monthly fee. This fee is typically based on the size of the system installed, your credit and other factors. The company leasing the panels will send their own solar installers to install the system on your home or business, and maintain ownership of the system. All of the electricity that you generate, however, is your own. In most cases, according to www.solar-panel-info.com, your new (lower) electric bill, plus the solar leasing costs will be less than your electric bill before your panels were installed. This means that you can start saving money during the first month of ownership.

If you wish to do so, you can also purchase solar panels outright. This can be done through the same companies that lease, or through other solar panel installers in your area. One of the benefits of purchasing your own solar panels is that you can take advantage of many tax benefits, rebate programs and other incentives. While this option may not work for everyone, you still have the ability to finance the purchase of the equipment, as well as the cost of installation.

Will Solar Panels Save Me Money?

According to the experts at www.solar-panel-info.com, most homes and businesses will start saving money during their first month of solar power generation. This is especially true if you choose to take advantage of a solar lease. In addition to lessening your dependence on electricity from your utility company, many utilities also give you the option to sell your electricity back to them. This can be incredibly beneficial on days that you can generate much more than you use. In most areas, especially during the summer, you will be generating the most electricity during peak hours, and drawing electricity during off-peak hours. Because of this, you will use lower-cost off-peak power from your utility and sell them back higher-cost peak electricity. This is perfect for offsetting cloudy, stormy days that will generate little to no electricity.

If you are looking for a great way to lower your energy bills, while also helping the environment, solar panel installation may be perfect for you. Now is an ideal time to start looking into this type of technology. There are many different incentives, rebates and leasing options that make getting started easier than ever before. If investing in the purchase of your own solar panels has been holding you back, take some time to look into companies that offer solar leasing. Experts in this field, such as Kim Hopkins, can give you some valuable insight and information into the options that you have in your area. If you have any additional questions, you can visit for more great information on solar installation.

Click here to read more.