When you hear something a lot, you tend to brush it off. Warnings about changing the batteries in your smoke detector are heard so often, it is easy to push the advice to the bottom of your to do list. When the smoke detector beeps incessantly, it is easier to pull the battery out with the idea you will put a new one in tomorrow. All of these seemingly innocent plans can actually be extremely dangerous. You never know when a fire will break out in your home and often times, it happens when the batteries are out of the smoke detectors. A good option for every home is to have hard-wired smoke detectors installed by a Los Angeles electrician like those at The Electric Connection.

Hard-wired smoke detectors remove the risk of a fire going undetected by a smoke detector without batteries. The smoke detectors are wired directly into the home’s main power by an electrician. Los Angeles homeowners will take comfort in knowing that as long as the power is on, the smoke detectors are functioning. There is a place to batteries in the detectors to act as a backup system should there be a power outage. This ensures the home is always protected, even if somebody borrowed the battery out of the smoke alarm.

You should invest in at least one hard-wired smoke detector on each floor and in the garage of your home. Another benefit to having these devices installed by a Los Angeles electrician is the fact they are all interconnected. When one alarm is sounded, all of the detectors will go off. This means if there is smoke detected in the garage, you will know about it if you are upstairs in your room. These tools can save lives. Give The Electric Connection a call today and schedule your smoke detector installation.

At Kolb Electric, we think it’s always interesting to see what types of calls come in each season. So with that in mind, we’ve put together a short list of the most common issues we take care of every winter, spring, summer, and fall. We hope you don’t have any of these problems any time of year, but if you do, call Kolb Electric!

Space heaters tripping circuit breakers – space heaters consume a huge amount of electricity, and if they are plugged into an outlet on an already overloaded circuit (one used to power holiday lights, for instance), they’re likely to cause it to trip. Circuits trip to prevent damage to the wiring of your electrical system, so knowing which outlets are on which circuits can prevent this from happening.

Kolb Electric offers circuit breaker repair »

Wet electrical connections shorting your GFCI – water and electricity don’t mix, and GFCI (ground fault circuit interrupter) outlets are designed to trip if they get wet. If any electrical device in or outside your home gets wet it could cause part of your home to short out. Knowing where your GFCIs are located and which outlets they control, can remedy this problem. If not, an electrician is your best bet for pinpointing and correcting the problem.

Broken down AC – if your air conditioner suddenly stops working during the summer, the first thing you should do is check the breaker. If it’s tripped, shut off the thermostat and reset the breaker. If it trips again after you turn the thermostat back on, call an electrician.

Window AC tripping circuit breakers – like space heaters in the winter, portable window air conditioners use a lot of electricity. Labeling the breaker connected to high energy-consuming appliances will remind people not to plug things into the same circuit.

Trees falling on meter boxes and risers – DC area springs and falls come with pretty unpredictable weather, which in rare cases can end up in downed trees on your property. Even a light touch from a tree limb can rip the electric meter base and riser off of the outer wall of your house.

Replacing ground fault circuit interrupter (GFCI) outlets –people like to test their GFCIs as part of spring and fall cleaning. So if you find any that need to be replaced, call Kolb Electric!

If you have any electrical problems in Maryland, DC, or Virginia, at any time of year, there’s only one name you need to know: the DC electricians at Kolb Electric!

Light switches are so common we rarely think twice about them. We walk into a room, flip the switch without looking and carry on. In the middle of the night or first thing in the morning, the light that comes on in an instant is a bit of a shock to eyes that have not quite adjusted. Lights are often a little too much for certain occasions and you are forced to choose between too much or too little. Or are you? Your California electrician has a better idea. The team at The Electric Connection can help you take control of the light in your life by installing a dimmer switch.

For a long time, dimmer switches were a common feature for chandeliers installed in the dining room area. This allows you to dictate just how much light you want to shed over the dinner table. Cheery breakfasts and lunches are best served with plenty of light. Evening meals that are meant to help you unwind or connect with your friends and loved ones over a delicious entree are best served with low light. It gives the space a more intimate feel.

You can have that same luxury of light control in every room in the house. There is some very minimal electrical wiring that will need to be done. It is a fairly easy switch to install a dimmer in place of your existing light switch. You can have one in the living room that allows you to turn down the lights while you are watching television. Another in the bathroom gives you the ability to have low light for those middle of the night visits instead of blinding light that wakes you up and interrupts a good night’s sleep. An electrician in southern California is ready to help. Just give The Electric Connection a call today and schedule your dimmer switch installation.

Your local electrician can handle a wide variety of jobs including powerpoint installation, switchboard upgrades, outdoor lighting, installation of electrical fixtures, CCTV installations and a lot more. While they handle all these jobs expertly, they can also handle new wiring installation and wiring upgrade projects. Here are some signs that indicate the wiring on your property needs an upgrade:

If you live in an older home which has wiring that’s over 15-20 years old or have moved into a home and have begun noticing too many current fluctuations, it’s important that you call in a skilled and licensed electrician to check the wiring on your property. If you have lived in the same house for over a decade and can’t recollect when you last got the installations inspected and tested, don’t defer calling in an electrician to conduct a thorough inspection.

Take a look the outlets in your home; check whether they are 3-pronged or 2-pronged. If you find there are various 2-pronged outlets on your property, it’s time for you to call in an electrician. These outlets are undergrounded and can pose a fire-hazard. You would have to get these replaced with 3-pronged ones and ensure that these are grounded. The other alternative is to replace these with GFCI outlets as this will help protect your property. Your electrician will be able to evaluate your property’s needs.

Many homes that were built in the 1960’s & 1970’s had aluminum wiring instead of the safer copper wiring. The former is prone to loosen over time and this increases the fire risk in your home, whenever any outlet is in use. When you get the wiring on your property inspected by an electrician, he would be able to tell you if there is any risk and will provide a suitable solution to the problem.

Modern day appliances are power-guzzlers and modern wiring systems are specially designed to bear these loads. However, any installation that is a few decades old is unable to bear the load of modern appliance such as washing machines, dishwashers etc. If you have more than one heavy appliance operating on one electrical circuit in your home, that can pose another problem. The excess load causes the older wiring to get heated which in turn melts the insulation around it. This exposed wiring results in arcing (hissing, humming sounds). If you ignore these signs and don’t get the installation checked in time, it can result in an electrical fire.

In most instances, wiring upgrades go hand-in-hand with switchboard upgrades. This is because decades’ old wiring systems also had older switchboards with fuse installations. If you find that the fuses in your home keep blowing very often, that’s another indication that your electrical wiring may need to be upgraded.

The electricians will replace the fuses with modern safety switches/circuit breakers. This improves the safety aspect of the electrical installations in your home. When you are getting any electrical work done on your property, it’s important that you hire the services of experienced and licensed professionals that provide guarantees for their work.

If you have noticed any of the signs we just discussed and feel your property may require a wiring upgrade, call AllRound Electrical without delay. Regardless of whether you want to get an electrical fixture installed or need complete rewiring done on your property, we are the professionals to hire. For any information about our services, feel free to call us at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263