How old is your home? Has your electrical system been updated within the last 5 – 10 years? If you haven’t asked these questions recently, it’s probably time to examine your options! Older homes with older electrical systems aren’t typically able to handle the stress of modern electrical appliances. So what can you do to make sure your home can safely run all of your appliances and electronics? Typically, a heavy up can be the answer to your problems. But should you install one? Let the experts at Kolb Electric answer!

A heavy up is an increase in the amperage (power) of your main electrical service. But how can you know if your home is in need of an increase of amperage? There are some things you can check to make sure you’re in need:

Depending on your specific goals, you have a range of upgrades available when thinking about a heavy up. Some service upgrades are as simple as adding a few additional circuit breakers to the existing box, or expanding the box with a subpanel. More complex upgrades may include things like replacing a fuse box or an aging panel with one that allows for higher energy capacity. A Kolb Electrician can evaluate the condition of your current panel with any problems you are experiencing to determine how extensive your upgrades will be.

The time depends on the job. Adding additional breakers to an existing panel is usually pretty quick, often taking less than an hour. Installing a subpanel is not too complicated either, often taking no more than a few hours.

Where it starts to take a long time is when you need to make serious upgrades. If you need to replace a fuse box or circuit main, you could be looking at a job that takes all day.

On any job site, having the right electrical safety gear is essential. For electrical projects, there are often special considerations, as some tasks can have unique hazards that require special gear.

Eye injuries are serious and for most electricians are a daily hazard. Having, and using, the right eye protection can make all the difference.

Electricians often work at heights, either on roofs, scaffolds, or elevated work platforms. In some locations, even working on a step ladder can require fall protection gear.

When the potential exists to fall more than 6 ft., fall protection gear should be worn. This includes an approved and inspected harness and a lanyard with the correct weight rating. Always ensure that the fully extended length of the lanyard is short enough to prevent the worker from contacting the ground in the event of a fall.

Hand injuries are the most common type of workplace injury, therefore selecting and using the right kind of gloves is vital.

Along with proper knife safety practices, using cut-resistant Kevlar gloves can greatly reduce the potential for cuts and scratches. In cold weather, ensure that insulated gloves are worn. When dealing with potentially hazardous chemicals, use gloves rated to handle the specific associated hazards.